19YJ94
Caught the Bug
I am still confused, LOL. I will look again but I swear I have 2 purple/lite blue wires.
Sent from my SM-S506DL using WAYALIFE mobile app
Sent from my SM-S506DL using WAYALIFE mobile app
My life with a Brick
- Thread starter JKbrick
- Start date
Weebz
Caught the Bug
Thanks Bill
wjtstudios
Hooked
Your wire bundle doesn’t look right. You need to find plug similar to that picture under the center console.
2015 JKUR AEV JK350
1985 CJ8 Scrambler
19YJ94
Caught the Bug
There's a separate plug that goes no where? I will have to look at that sometime. Thanks, Bill.
Sent from my SM-S506DL using WAYALIFE mobile app
Sent from my SM-S506DL using WAYALIFE mobile app
wjtstudios
Hooked
JKbrick
Active Member
You can come over, just stop 6’ before you get here [emoji23][emoji23]
Sent from my iPhone using WAYALIFE mobile app
wjtstudios
Hooked
I’ll bring a pair of binoculars to make sure he cuts the right wire
2015 JKUR AEV JK350
1985 CJ8 Scrambler
Ddays
Hooked
JKbrick
Active Member
I'm available for Facetime
That’s pretty technically advanced, I’ll have Em call you!!
Sent from my iPhone using WAYALIFE mobile app
JKbrick
Active Member
Got it finally, had to hit the hole through the frame with a step bit 1 size bigger.
The bushing in the axle looks off center. Now I need to change the bolt on the other side, damn you OCD
Sent from my iPhone using WAYALIFE mobile app
The bushing in the axle looks off center. Now I need to change the bolt on the other side, damn you OCD
Sent from my iPhone using WAYALIFE mobile app
JKbrick
Active Member
Another question, after I changed springs I never adjusted the caster, I need 2*, going to make the lowers longer. Would 2* equate to around 1/8” or closer to 1/4”?
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
19YJ94
Caught the Bug
JKbrick
Active Member
Thanks Ric, did you see a plug in your Jeep that looked like the one posted?
Sent from my iPhone using WAYALIFE mobile app
19YJ94
Caught the Bug
Still working on the valve cover gaskets, and of course I had to go to auto store after already tearing it apart! Had to pick up the infamous 8mm deep socket! But I will get to it, still off work!
Sent from my SM-S506DL using WAYALIFE mobile app
JKbrick
Active Member
desertrunner
Hooked
I don't know that there is a good way to do it other than guess and check.
I just added 2* to mine not too long and I think it was 3 full rotations of the joint.
Sent from my SM-G950U using WAYALIFE mobile app
19YJ94
Caught the Bug
Was going to but neighbor insisted I borrow his car, lol.
Sent from my SM-S506DL using WAYALIFE mobile app
JKbrick
Active Member
Thanks, I did 4 turns and got from 85 to 88 or 89 at the diff so must be a turn for a degree
Sent from my iPhone using WAYALIFE mobile app
JKbrick
Active Member
