WJCO
Meme King
So far, I like the look of those sliders the best.
Willys-Overland JT Build
- Thread starter Saharaunlmtd
- Start date
So far, I like the look of those sliders the best.
Saharaunlmtd
Caught the Bug
Saharaunlmtd
Caught the Bug
A little progress made in the cold today. I got my Rugged Ridge Bumper and Warn EVO 10S on today. 
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Andy5160
Hooked
Elroy231
Active Member
JKbrick
Active Member
Saharaunlmtd
Caught the Bug
How about a little build update…
4/7/21
Installed Rockhard 4x4 Rock Rails. They were well worth the wait.
4/18/21
The winch/bumper combination left me with a little more rake than I cared for so I swapped out the front 2” AEV spacer in favor of 3.5” JKS springs.
4/19/21
Had some random rock lights sitting around that I bought for a previous build but never got around to installing. Amazingly the wires were long enough to run 3 on each rock and one in the front and rear.
5/2/21
Installed a rear bumper.
5/18/21
Installed some DIY bedsliders that I cut out of 1/2” steel. They make a great step as well as provide some protection.
5/26/21
I installed a DIY bed rack. Made it out of aluminum to be light and mounted it with 4 bolts so that it is easy to remove. It’s not the most aesthetically pleasing but it’s purpose built. A mid height would look better but then my kayak wouldn’t clear the roof. If it was angled to mimic the body lines it would look better but I wanted to retain full use of my trifold tonneau.
5/31/21
Threw an oil / transmission skid plate on to protect those tranny lines.
I’m sure I missed to so there’s the cliff notes version
4/7/21
Installed Rockhard 4x4 Rock Rails. They were well worth the wait.
4/18/21
The winch/bumper combination left me with a little more rake than I cared for so I swapped out the front 2” AEV spacer in favor of 3.5” JKS springs.
4/19/21
Had some random rock lights sitting around that I bought for a previous build but never got around to installing. Amazingly the wires were long enough to run 3 on each rock and one in the front and rear.
5/2/21
Installed a rear bumper.
5/18/21
Installed some DIY bedsliders that I cut out of 1/2” steel. They make a great step as well as provide some protection.
5/26/21
I installed a DIY bed rack. Made it out of aluminum to be light and mounted it with 4 bolts so that it is easy to remove. It’s not the most aesthetically pleasing but it’s purpose built. A mid height would look better but then my kayak wouldn’t clear the roof. If it was angled to mimic the body lines it would look better but I wanted to retain full use of my trifold tonneau.
5/31/21
Threw an oil / transmission skid plate on to protect those tranny lines.
I’m sure I missed to so there’s the cliff notes version
2007 JKU CANADA
Hooked
Nice clean looking JT
wjtstudios
Hooked
Great looking JT!
