Clutch
Caught the Bug
Have you talked to Axleboy in St.Peters? I'm sure they would do a good job.
What was done to your rig this week?
- Thread starter 10frank9
- Start date
Have you talked to Axleboy in St.Peters? I'm sure they would do a good job.
Cesar jk
New member
What lift are you running?
WarriorJeep
New member
This week installed lift kit, and my favorite some wheels from Raceline. Still have to wait for my PR44 and ProGrip brake kit to arrive and install (thanks Trail Jeeps for fitting me in) and its off to EJS to see what I can break. Because as we all know something will inevitably break.
On the lift at High Country Performance 4x4
Scott arguing with my grabbers
Raceline sexiness
On the lift at High Country Performance 4x4
Scott arguing with my grabbers
Raceline sexiness
kentuckianajk
New member
kentuckianajk
New member
Drivers side some
2nd.gunman
Caught the Bug
I'm gonna go out on a limb and say skyjacker
[emoji6] that is correct sir!
LasVegasJK
New member
With the help of NV375, I installed EVO rocker and corner armor, EVO plate relocation, Poison Spyder led plate light/3rd brake light with Maxxima led stop/tail/turn/reverse lights. 
mudmobeeler
Caught the Bug
Looks good. [emoji106]
Albo
New member
Looks good. Did you remove the grill or leave it in tact when you sprayed it? I bought a can last weekend and want to do mine too.
GraniteCrystal
New member
Removed it. Check build thread in my signature and you'll find a full how-to with pics.
JeepJeep75
New member
Mounted up my new-to-me Hi-lift jack today that I scooped up from Yeep. Thanks Yeep!!!
notnalc68
That dude from Mississippi
Very nice!
jeeeep
Hooked
new tie rod, flip drag link, removed aluminum track bar bracket and installed weld on steel bracket recommended for the PR44 by Dynatrac - a lot better steering from the PSC now.
replaced leaky transmission cooler lines, the original leaked because Chrysler used a 3/8" hose on a 5/16" tube with no barbs to hold the hose and avoid leaks...luckily I found some 11/32 hose to make do until the new line arrived. New cooling line appears to have a flare on the end for the clamp the keep the hose on and avoid leaks, time will tell..i'm keeping the repaired line just in case...
installed rear seat incline blocks, it's more comfortable seating now, I was pleasantly surprised :thumb:
installed quadratec led fog lights, they match great to the visionX headlights
painted the flares back to black using Eastwood plastic resurfacer
gave the Jeep a wax after 4 years
ordered phone replacement...got in a hurry to test drive and forgot I had my phone on top of the tire, ran over it so no pics at this time :doh:
replaced leaky transmission cooler lines, the original leaked because Chrysler used a 3/8" hose on a 5/16" tube with no barbs to hold the hose and avoid leaks...luckily I found some 11/32 hose to make do until the new line arrived. New cooling line appears to have a flare on the end for the clamp the keep the hose on and avoid leaks, time will tell..i'm keeping the repaired line just in case...
installed rear seat incline blocks, it's more comfortable seating now, I was pleasantly surprised :thumb:
installed quadratec led fog lights, they match great to the visionX headlights
painted the flares back to black using Eastwood plastic resurfacer
gave the Jeep a wax after 4 years
ordered phone replacement...got in a hurry to test drive and forgot I had my phone on top of the tire, ran over it so no pics at this time :doh:
kentuckianajk
New member
Got my rock skinz on. Now I need to find a person or good company that can show me how to weld my sliders
On. Or do it at a fair. price [
ATTACH]191880[/ATTACH]prlice
On. Or do it at a fair. price [
ATTACH]191880[/ATTACH]prlice