What was done to your rig this week?

[epetry]

Got a package from trail jeeps, nothing huge but some cool little things. This water bottle is awesome! Smooth drinking, keeps water cool, even has storage in there for a key and money or credit card. Great bottle to have on and off the trails. Also got there radio antenna. (Well see how it works tomorrow).

 

[Guascone]

I didn't really take pictures on this one, but I used this picture for reference. You want the purple wire with light blue stripe, and you want to add your switch right before it enters that little box under the center console. View attachment 190769

Thank a for the pictures and for the explenation!

 

[Guascone]

How'd you end up attaching them?

I decide to try the bolt-on way...I welded the flange directly to the frame and then I threaded it. The sliders are bolted to the flange.
Up to now, this type of fixing, seems enough strong for the my type of wheeling…in case of failure I have the possibility to come back and weld it directly to the frame.
To be honest and for the people that are reading, EVO Crew discouraged me to perform this type of fixing.
In case of any future failure, I can’t blame the EVO quality.
But as Overlander told me in another post “You can’t change my mind…”

 

[soedog]

Warmed up here in NE Ohio this weekend so I mounted up the 35's. Getting ready for spring!

 

[2nd.gunman]

I decide to try the bolt-on way...I welded the flange directly to the frame and then I threaded it. The sliders are bolted to the flange.
Up to now, this type of fixing, seems enough strong for the my type of wheeling…in case of failure I have the possibility to come back and weld it directly to the frame.
To be honest and for the people that are reading, EVO Crew discouraged me to perform this type of fixing.
In case of any future failure, I can’t blame the EVO quality.
But as Overlander told me in another post “You can’t change my mind…”

Don't worry I remember that thread which is why I asked. I'll be building some bolt on sliders later this year because I don't want weld on either

 

[Guascone]

Don't worry I remember that thread which is why I asked. [emoji16] I'll be building some bolt on sliders later this year because I don't want weld on either

Let me know If I can help you with some pictures or informations [emoji482]

 

[relicdigger]

Warmed up here in NE Ohio this weekend so I mounted up the 35's. Getting ready for spring!View attachment 190856
View attachment 190857
View attachment 190858

Great looking rig, its stance is perfect with those fenders and wheels... on a two door.

 

[Schladermagic]

Where is the best place to buy a soft top at a reasonable price

 

[swampdog]

Where is the best place to buy a soft top at a reasonable price

Craigslist

 

[12-mile]

Where is the best place to buy a soft top at a reasonable price

Seems like plenty of people have found used ones on craigslist if you are patient and watch for them.

 

[Schladermagic]

What if I want a new one where or what website would be the best

 

[hinrichs]

What if I want a new one where or what website would be the best

Personally I got my trektop from amazon, I have found good deals elsewhere tho before, just happened they had the best offer at the time.

 

[WJCO]

What if I want a new one where or what website would be the best

Quadratec might too. I just got their huge catalog in the mail. I swear I saw some in there.

 

[Clutch]

Did this and this! Passenger D-Ring was a pain but the driver side was smooth as silk. It was fun using the Sawzall and Dremel on the rig. I tried to get some shots with the sparks flying but had no luck.

 

[Lone Ranger]

Got my home made switch panel all finished

 

[stormtroopedjk]

Got the flow master 40 on the jeep and....

Got my windows tinted finally.

 

[Lone Ranger]

Got all 12 rock lights wired up and have 4 come on right below the doors when you open the doors

 

[Ryldup]

No pictures, but Jolene got new brake pads in the rear. Then I effed up the front. Decided to take it in to a local shop today, so she's getting new rotors, calipers, and pads up front. Thanks for the advice Overlander JK and Jeeep for the advice, but don't have time to extract the bolt myself. It's gonna cost me, but it'll be done and over with and able to drive. I'll tackle the rear rotors next week.

 

[LasVegasJK]

Got all 12 rock lights wired up and have 4 come on right below the doors when you open the doors View attachment 190948View attachment 190949

How did you wire those to come on with the doors?

 

[Lone Ranger]

How did you wire those to come on with the doors?

I had to use two relays one that took the power from the dome lights and one that was wired to the switch and then both the relays were wired together to keep from back flowing. I'll try to draw it out in a little while when I get home. Much easier to draw out then explain it