What was done to your rig this week?
- Thread starter 10frank9
- Start date
JKbrick
Active Member
Arrcherr
Caught the Bug
That is definitely a cool looking plate!
wjtstudios
Hooked
JKbrick
Active Member
BaddestCross
Active Member
Just changed the fluids in the transfer case and diffs... Starting to prep for the New Year run. 
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
jesse3638
Hooked
Yep I need to do the same. If I can make time I plan on swapping I'm the 4" plush rides. If I'm feeling ambitious I'll do the rockstar skids too. That will also require I get the LCA axle end Bolt out which I realized was stuck when I went to have the clevite replaced last year..haha. First will be the CB fix.Just changed the fluids in the transfer case and diffs... Starting to prep for the New Year run.
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Sent from my 2PYB2 using WAYALIFE mobile app
BaddestCross
Active Member
Lol. The Rockstar skids were a pain in my ass. Took me 3 weekends to do them. Granted, I only had a couple hours a day to work on them, just didn't expect them to be such a pain in the ass. It didn't help that my shoulder was fucked up and I only had low jack stands, but still.
Is your LCA bracket fucked up like mine was? I had a hell of a time with one of the bolts too. Big fucking hammer, grinder, and SawzAll finally got the job done.
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Seahawkfan
Hooked
Nice I'm running the same.:thumb:
jesse3638
Hooked
Yeah my passenger side is peeled back like a tin can lid so I'm going to use my big ass crescent wrench to start to get it next back before cutting it. It's my drivers side LCA axle end bolt. It's acting like its bent. Probably going to ring up something for a slide hammer to pull it. The other option would be pulling the axle shaft and using a punch. Either way it's going go be a pain.Lol. The Rockstar skids were a pain in my ass. Took me 3 weekends to do them. Granted, I only had a couple hours a day to work on them, just didn't expect them to be such a pain in the ass. It didn't help that my shoulder was fucked up and I only had low jack stands, but still.
Is your LCA bracket fucked up like mine was? I had a hell of a time with one of the bolts too. Big fucking hammer, grinder, and SawzAll finally got the job done.
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Sent from my 2PYB2 using WAYALIFE mobile app
Last edited:
BaddestCross
Active Member
Gah... Yeah, good luck with that. I feel your pain.
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Melosh (tennis pro)
New member
I’m halfway through swapping out my sport axles for rubicon axles...while this one was out, I decided to paint it. Hoping to get the front in next weekend
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Melosh (tennis pro)
New member
TND333
Member
Decided to pull the trigger on new wheels and tires last month. Ended up with some ATX Slabs and Nitto Mug Grapplers. Mounted and installed them last weekend.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
fiend
Caught the Bug
PEACEMAKER1
New member
HA! Yeah one of those times where I made sure to type slow on the MVD page when ordering it
Thanks! Yeah I love the flag. Can't wait to get a whip to match too.
Nice lookin plate there too!
Coop
Caught the Bug
Now you can sell your radio! I’ve had my grapplers for 2 years. Gave up on trying to hear the radio and now, I can’t hear anything!
Sent from my iPhone using Tapatalk Pro
A.J.
Active Member
boardsurfer
Active Member
It was fun, but that was an expensive wash.
:icon_crazy:
:icon_crazy: