The building of knuckles

[OverlanderJK]

No way. It was used on a larger than stock vehicle.

:cheesy::cheesy: That's like the second fat joke today.

 

[Sharkey]

Nah, I roll with the same sized vehicle. :cheesy:

 

[2012jkfng702]

Holy crap Mike, just caught up with ur thread again at the cost of my cell battery and a few brain cells I couldn't spare. Had to take a break from weight and balance and center of gravity etc... You gonna have knuckles ready for Vegas. Figure we could make a new skid plate for the evap canister out of knuckles old muffler that's over here ;-). I have a loud clunk coming from the passenger side rear on the Wagon. It only happens ever once in a while on acceleration. Almost think its e brake related but haven't had the time to crawl under there. Any way get down here I need a :beer:

 

[MTG]

Take II

I have zero faith this will work.

 

[10frank9]

Take II

I have zero faith this will work.
View attachment 22614

Hey if some works well a lot should be better right? Haha

 

[OverlanderJK]

Have you thought of using fiberglass resin? That stuff is strong as hell!

 

[MTG]

Hey if some works well a lot should be better right? Haha

This stuff is not as thick. Needed to use a lot more of it.

 

[MTG]

Have you thought of using fiberglass resin? That stuff is strong as hell!

No. I'll just go buy a new one. I've lost interest in fixing this POS. :yup:

 

[MTG]

Holy crap Mike, just caught up with ur thread again at the cost of my cell battery and a few brain cells I couldn't spare. Had to take a break from weight and balance and center of gravity etc... You gonna have knuckles ready for Vegas. Figure we could make a new skid plate for the evap canister out of knuckles old muffler that's over here ;-). I have a loud clunk coming from the passenger side rear on the Wagon. It only happens ever once in a while on acceleration. Almost think its e brake related but haven't had the time to crawl under there. Any way get down here I need a :beer:

Always a pleasure when you stop by. :thumb:

I've cancelled two trips to Vegas so far this year. Next time might not be until the marathon run. :grayno:

 

[OverlanderJK]

No. I'll just go buy a new one. I've lost interest in fixing this POS. :yup:

Bring it to Vegas and I will bring the resin I have. We could try it simply for trial and error. Oh and not sure if this would fit but....

http://sandiego.craigslist.org/ssd/pts/3716595364.html

 

[2012jkfng702]

Always a pleasure when you stop by. :thumb:

I've cancelled two trips to Vegas so far this year. Next time might not be until the marathon run. :grayno:

Damn, well at least I'll probably need a break by then as well

 

[hinrichs]

we sell stuff at my work which ive used before with sucess on other things, its "metal set a4" made by smooth on which is kind of like jbweld but seems stronger

 

[MTG]

Well it seems to have held up. I reinstalled it just now and they nipples did not break off upon installation. :thumb:

My understanding is that it will take a few trips or it to register if it is working again so we shall see.

 

[paychex.308]

Well it seems to have held up. I reinstalled it just now and they nipples did not break off upon installation. :thumb:

My understanding is that it will take a few trips or it to register if it is working again so we shall see.

what did u end up using?


andrew -

 

[MTG]

what did u end up using?

The stuff you recommended. :thumb: Loctite plastic epoxy. Said it worked on ABS. So I used that...the whole canister...there is about 3 layers of it on the parts. :cheesy:

 

[paychex.308]

very nice... hope it works!

andrew -

 

[MTG]

very nice... hope it works!

That makes at least two of us.

 

[The Wandering Jeeper]

Well you can honestly say you gave it a try ...:rock:

 

[MTG]

Well you can honestly say you gave it a try ...:rock:

Definitely gave her the ol' college try. :cheesy:

 

[MTG]

Brown Santa arrived today....

Who can name these parts? There are 4 sets of them.