The Building of Compromise

Rancho said:
Yep, the TMR are legit.
Cost a bit more, but IMO worth it.
My only "complaint" is that I forget to put a dab of grease on them during the winter. I get a squeak everyone once in a while.



Yep I remember being scared the door was going to fly off.
You need a long 9mm to pop out the old liner. And PB Blaster to soak the old ones a bit.
Click to expand...

cozdude said:
Here's a pic of the stock ones compared to the tmr liners.
Click to expand...


Good tips. If we do the inserts, we'll go with these for sure.
 
WJCO said:
And I don't mean to sound like a badass, but I didn't think the doors were that heavy and I'm a small guy. After reading all the stories of injuries and door damage, I expected the doors to be much heavier but didn't think they were that bad at all.
Click to expand...

Do yourself a favor & pick one of these up at Home Depot/Lowes etc- they're like $5. Make putting doors on & off a breeze

Stanley-Panel-Carry-Tool-200lb-Capacity-93-300-Plywood.jpgFH04FEB_DRYWAL_05.JPG
 
JKbrick said:
Quadratec has them now also, a friend of mine and I split a kit for a 4 door since we only needed half a kit each and one tool


Sent from my iPad using WAYALIFE mobile app
Click to expand...

Yea but they are not as good. Gregmort has the qtech ones on his Jeep and his doors are all seized up and stuck in the liners after only a few months. Literally takes twenty minutes to pull them off. My tmr liners are almost two years old and still work like new.
 
cozdude said:
Yea but they are not as good. Gregmort has the qtech ones on his Jeep and his doors are all seized up and stuck in the liners after only a few months. Literally takes twenty minutes to pull them off. My tmr liners are almost two years old and still work like new.
Click to expand...

Edit: that took embarassingly long to figure out ho to post

DO NOT GET THE QUADRATEC LINERS


Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
cozdude said:
Yea but they are not as good. Gregmort has the qtech ones on his Jeep and his doors are all seized up and stuck in the liners after only a few months. Literally takes twenty minutes to pull them off. My tmr liners are almost two years old and still work like new.
Click to expand...

GregMort13 said:
Edit: that took embarassingly long to figure out ho to post

DO NOT GET THE QUADRATEC LINERS


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Eek! I thought they were the same thing? I wonder what the difference is, I figured delrin was delrin, dangit
Edit, I had to adjust my catches or whatever they are called up due to the thickness of the bushing, is the tmr like that too?

Sent from my iPad using WAYALIFE mobile app
 
Last edited:
JKbrick said:
Eek! I thought they were the same thing? I wonder what the difference is, I figured delrin was delrin, dangit
Edit, I had to adjust my catches or whatever they are called up due to the thickness of the bushing, is the tmr like that too?

Sent from my iPad using WAYALIFE mobile app
Click to expand...

The tmr slide right in and fit amazingly. Didn't have to touch the door pins at all.
 
You must log in or register to reply here.
Top Bottom