Well, it could be worse. You could be unemployed and wondering how you can afford to work on your Jeep
The building of Anvil II -- The Deuce
- Thread starter notnalc68
- Start date
Well, it could be worse. You could be unemployed and wondering how you can afford to work on your Jeep
notnalc68
That dude from Mississippi
Well, it could be worse. You could be unemployed and wondering how you can afford to work on your Jeep
True. Or start a Jeep build to raise awareness for overworked people, and ask for donations on Wayalife, lol.
Sent from my iPhone using WAYALIFE mobile app
:cheesy: That could work :crazyeyes:
notnalc68
That dude from Mississippi
I installed the Rotopax setup, I got from RockHard 4x4, today.
I purchased their license plate relocation kit. You just have to drill four holes in it, to mount the Rotopax plate.
A 5/16" clevis pin, from Ace Hardware, helps eliminate any wiggling. I'd like to be able to lock it on, but I'll either have to drill another hole, or find a 5/16" hitch bolt lock. I cranked the thumb screw down, with a set of pliers. Shouldn't be easy to get off.
Here it is. Everything seems steady, and doesn't seem to put much more stress on the tailgate, with 4 gallons of gasoline in them.
I got the locking mount.
That will do, until I buy the RockHard bumper & tire swing.
Sent from my iPhone using WAYALIFE mobile app
I purchased their license plate relocation kit. You just have to drill four holes in it, to mount the Rotopax plate.
A 5/16" clevis pin, from Ace Hardware, helps eliminate any wiggling. I'd like to be able to lock it on, but I'll either have to drill another hole, or find a 5/16" hitch bolt lock. I cranked the thumb screw down, with a set of pliers. Shouldn't be easy to get off.
Here it is. Everything seems steady, and doesn't seem to put much more stress on the tailgate, with 4 gallons of gasoline in them.
I got the locking mount.
That will do, until I buy the RockHard bumper & tire swing.
Sent from my iPhone using WAYALIFE mobile app
Last edited:
notnalc68
That dude from Mississippi
Thanks, man. I'm running them full of fuel, to see if they rattle. I really wanted to carry more than 2 gallons. I may buy another can. Heck, since I don't have to pay for that in vitro, I guess I could go ahead and get a rear bumper,
Sent from my iPhone using WAYALIFE mobile app
catahoula
Caught the Bug
I think this is the first time I've seen it installed on a Jeep. That came out real nice! :thumb:
notnalc68
That dude from Mississippi
Mike_JK_Houston_711
New member
Looks good clay. I need to start looking at rotopax options for our Colorado trip.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
notnalc68
That dude from Mississippi
They're pricey, but actually a really convenient way to carry extra fuel. There are lots of mounting options, with a lot of aftermarket bumpers. You should be able to mount a 4 gallon, or two, on your tire carrier.
Sent from my iPhone using WAYALIFE mobile app
notnalc68
That dude from Mississippi
New decals, today. Going old school & repping a great site. Thanks Eddie & Cindy!
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
notnalc68
That dude from Mississippi
TrainWreck618
Caught the Bug
notnalc68
That dude from Mississippi
notnalc68
That dude from Mississippi
Dale72
Hooked
notnalc68
That dude from Mississippi
Early. I wasn't planning on it, until next year, but something I was about to have to drop some money on, changed.
Sent from my iPhone using WAYALIFE mobile app
Dale72
Hooked
I'll be heading to CA in the morning. I can be home next weekend if you want some help
Sent from my QTASUN1 using WAYALIFE mobile app
Sent from my QTASUN1 using WAYALIFE mobile app