10frank9
Web Wheeler
Loos great. I love the colors,,, I might copy, with permission of course.
No problem, I appreciate the kind words. (In exchange for some LED lights) :cheesy:
TankJK: My Billet Rubi Build
- Thread starter 10frank9
- Start date
No problem, I appreciate the kind words. (In exchange for some LED lights) :cheesy:
pastorwug
New member
While my cage is at the powder coaters ($200), I'm working on these covers.
Is that all that's necessary to do to make them fit with the cage in?
How much moola you need to trim mine too?
10frank9
Web Wheeler
Honestly, since each one is relatively different I would recommend waiting until you install the cage before cutting and fitting the trim. :yup: The overhead horizontal bar on mine is slightly further back on the passenger side due to a factory weld. Go figure, a crappy factory weld.
:crazyeyes::shock:
10frank9
Web Wheeler
So today I had a few spare minutes so I finished trimming the passenger side plastic moulding at the A pillar. 
I also installed the spacers on the lower hole at the A pillar cage piece. This makes closing the doors a bit easier, didn't realize before but noticed some rubbing also at the inside of both doors.
I also installed the spacers on the lower hole at the A pillar cage piece. This makes closing the doors a bit easier, didn't realize before but noticed some rubbing also at the inside of both doors.
JAGS
Hooked
Did the spacers come with the cage?
10frank9
Web Wheeler
No. I machined them myself. I smelted a bunch of old beer cans together, then used a water table to cut them.
Kidding. Yes they supply two pair. In two different thicknesses for her pleasure.
JAGS
Hooked
:cheesy: I figured you didn't "make" them. Why didn't you install originally? Just a custom fitment based on each install I guess. :thinking:
10frank9
Web Wheeler
10frank9's Billet Rubi Build
Yes. Very custom. I didn't install them originally until, well honestly I didn't read the Rockhard directions. (Oops)
A couple of weeks ago was having a conversation with Mel [Name drop here] about the install and he mentioned the spacers. Lol. OOOOOOH. That's what those are for.
Yes. Very custom. I didn't install them originally until, well honestly I didn't read the Rockhard directions. (Oops)
A couple of weeks ago was having a conversation with Mel [Name drop here] about the install and he mentioned the spacers. Lol. OOOOOOH. That's what those are for.
10frank9
Web Wheeler
It should be pretty obvious. And it takes an extra push to close the doors without the spacers.
MTG
Caught the Bug
Built, not bought. :thumb:
JAGS
Hooked
Well, thanks for sharing the tidbit. I'll be sure to double check that section of the instructions.
10frank9
Web Wheeler
Well, thanks for sharing the tidbit. I'll be sure to double check that section of the instructions.
Why? ORE has installed their share of cages. I'm pretty sure you won't even have to ask them when they install yours. :yup: :cheesy:
MTG
Caught the Bug
I'll take them. Checked mine today, they are rubbing. Besides this install is so easy even a caveman could do it.
JAGS
Hooked
I hopefully won't be in as much of a rush as I was with my suspension and carrier.
Don't me wrong. I've asked how much to install.
The potential savings means I can get my switch set up. I'll have some weekends free come the new year. Maybe I can get some help via bribes with some beer and burgers/pizza.
10frank9
Web Wheeler
What about those diff covers? :grayno: :idontknow: