critter812
New member
So this happened Yesterday! Dynatrac Trail leader package!
So this happened Yesterday! Dynatrac Trail leader package! BUMMER it was Made Wrong
- Thread starter critter812
- Start date
JKbrick
Active Member
Stotch
Caught the Bug
Congrats! That'll be nice!
Angry Aussie
New member
Bear_JT
Hooked
wjtstudios
Hooked
That’s awesome! Congrats
2015 JKUR AEV JK350
1985 CJ8 Scrambler
2015 JKUR AEV JK350
1985 CJ8 Scrambler
critter812
New member
Well that did not go as planned! Hoping its a simple fix! installed the PR44 only to realize could not bolt my unit bearings all the way down either the Shafts are tool long by 1/4" or the tubes are 1/4" to short. Either way this may impact my upcoming trip to WindRock. Hoping that its the shafts not the housing.
Ddays
Hooked
Well that really sucks. Like you said - hopefully it's the shafts - that'd be a damn shame if the housing needs swapped. :grayno:
TheGrendel
Active Member
Damn I hope Dynatrac can get you sorted ASAP. Seems like a fairly big oversight.
JKbrick
Active Member
Can you cut 1/4” or so off the differential spline of the shafts?
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Ddays
Hooked
Wonder how many sawzall blades that'd take? :thinking:
critter812
New member
I image I could take it to a machine shop and have them cut down but I did not spend what I did to have to cut down their shafts. Especially if its the housing that's too short.
JKbrick
Active Member
I don’t know they must be soft they bend easy [emoji23][emoji23], just joking
Sent from my iPhone using WAYALIFE mobile app
JKbrick
Active Member
I understand, just thinking it would suck to miss a trip for it
Sent from my iPhone using WAYALIFE mobile app
nbunga
Caught the Bug
I would think it would be the shaft if something is the wrong length. With the jigs they use to assemble the axle I don’t see how they could weld it together with the wrong length tubes on it. Could it be something in the differential not letting them go all the way in?
Bigger Hammer[emoji16]
Bigger Hammer[emoji16]
TheGrendel
Active Member
Dynatrac has been making these for like a decade. Shouldn't it all be SOP. Housings, shaft lengths, etc?
OverlanderJK
Resident Smartass
Was it not assembled when you got it? Looked like it in the pictures.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Exodus 4x4
New member
critter812
New member
As Bubba said was assembled once Knuckles were installed noticed an issue then the Unit bearing would not fully seat about 1/4" off on both driver and passenger side
JKbrick
Active Member
Make sure you let us know what it is when you figure it out. Did you try twerking in front of it?
Sent from my iPhone using WAYALIFE mobile app