Ironic timing for a thread bump. Just did a full exterior detail today. Including door jams, engine compartment, etc. So satisfying.
View attachment 339925
View attachment 339926
View attachment 339928
View attachment 339927
For what it’s worth, after a good cleaning, I use Camp Dry on my interior fabric. Takes about a can and a half. The sand and dog hair sits on top a little better taking an interior vac from a 4 hour job down to 2 1/2 hours.
I’m going to look into Chemical Bros. The dogs definitely left some stink in the Jeep.
I just looked that stuff up. That's a good idea. I use a similar product for my boots and winter backpacking gear.
They are great. They even have some videos on removing pet hair.
To remove dog hair I HIGHLY recommend checking out these 2 products:
https://www.amazon.com/Fur-Zoff-Pet-Hair-Remover/dp/B07V4MQC5X
This is fantastic for the majority of carpeted areas, but it's coarse so you want to keep it away from your plastic.
https://www.amazon.com/Chemical-Guys-ACC_S06-Professional-Removal/dp/B0042B4B3U
This is the brush I use closer to the plastic areas.
If you mix water to fabric softener ~3:1 and spray the carpet lightly before hand it helps release the dog hair. I spend about 45 min to an hour and can get the carpet to almost factory condition.
That Fur-Zoff worked great on the carpets. Especially the back of the back seats that I never seem to be able to get completely clean. I didn’t feel it worked well on my seats tho. Too abrasive. Well worth it just for the carpet tho and I haven’t even tried the fabric softener trick yet.
Thanks again guys.
Sent from my iPhone using WAYALIFE mobile app
I picked up some Waterless Wash today to try out. No bucket. No Hose. Indoors. I've never used anything like this but it's pretty cool. It comes in a spray bottle, and you spray some on your microfiber towel, spray some on the panel you're working on, and gently wipe up the dirt and dust. Then you fold your towel to have a clean edge and start the next row so that you're not dragging more dirt across the paint. Once the panel is cleaned, you take another clean microfiber towel and wipe off any remaining chemical or haze. I did the whole Jeep with no scratches so I'm happy. I don't think it saved me any time compared to a traditional wash, but for the sake of being in a warm garage or when it's snowing outside, etc. This is a nice convenient option I think.
Here's the stuff I used:
View attachment 340503
Here's the hood showing where it was dusty and where I cleaned:
View attachment 340504
View attachment 340505
This is the kind of stuff I was dealing with on the sides:
View attachment 340506
And here's the dirty towel:
View attachment 340507
Would it show if you got some overspray on your soft top?
Sent from my iPhone using WAYALIFE mobile app
I picked up some Waterless Wash today to try out. No bucket. No Hose. Indoors. I've never used anything like this but it's pretty cool. It comes in a spray bottle, and you spray some on your microfiber towel, spray some on the panel you're working on, and gently wipe up the dirt and dust. Then you fold your towel to have a clean edge and start the next row so that you're not dragging more dirt across the paint. Once the panel is cleaned, you take another clean microfiber towel and wipe off any remaining chemical or haze. I did the whole Jeep with no scratches so I'm happy. I don't think it saved me any time compared to a traditional wash, but for the sake of being in a warm garage or when it's snowing outside, etc. This is a nice convenient option I think.
Here's the stuff I used:
View attachment 340503
Here's the hood showing where it was dusty and where I cleaned:
View attachment 340504
View attachment 340505
This is the kind of stuff I was dealing with on the sides:
View attachment 340506
And here's the dirty towel:
View attachment 340507
I did prematurally. And it didn't show. I just wiped it off.
Fixed it for you
Lol. The job still got finished and I was satisfied with it.
What's everyone do for black powdercoat to clean it and protect it?
What's everyone do for black powdercoat to clean it and protect it?