Anvil Jeep Build - Jetlau3

IMG_6500.jpg
IMG_6501.jpg
IMG_6513.jpg

Test fit the evo front bumper skid plate and now just need to paint .

Got the rockstars installed . Was a PITA . Brackets were all folded over, went through 4 M18 batteries with sawzall and grinder but looks good now that it’s done .

Greasing that joint seems like it’ll be a huge problem moving forward ..



Sent from my iPhone using WAYALIFE mobile app
 
A.J. said:
Looks good! The real Jeep and the RC.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Thanks both are progressing ... slowly

BaddestCross said:
Good job! Those Rockstars are a pain in the ass.



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Click to expand...

Haha no kidding . Lot of pry bar and hammer

TrailHunter said:
Looks good man... I’ve had Rockstars on my bench for over a year.. Lol
Click to expand...

Get on it man !! Need just 5 hours give or take



Sent from my iPhone using WAYALIFE mobile app
 
danford.lau said:
View attachment 345237
View attachment 345238
View attachment 345239

Test fit the evo front bumper skid plate and now just need to paint .

Got the rockstars installed . Was a PITA . Brackets were all folded over, went through 4 M18 batteries with sawzall and grinder but looks good now that it’s done .

Greasing that joint seems like it’ll be a huge problem moving forward ..



Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Good job Dan. I found an angle grinder beneficial with the rockstar install.

As far as greasing the rear LCAs I found a 90 degree adapter that works to grease mine. Got mine at oreilly's not Amazon.Screenshot_20200413-085348_Amazon%20Shopping.jpg

Sent from my SM-G965U1 using WAYALIFE mobile app
 
TrailHunter said:
Looks good man... I’ve had Rockstars on my bench for over a year.. Lol
Click to expand...
Same here. I just finally got the plush rides installed...haha.

rubiDave said:
Good job Dan. I found an angle grinder beneficial with the rockstar install.

Sent from my SM-G965U1 using WAYALIFE mobile app
Click to expand...
That was my thought. I need to get a couple more 30 grit flap wheels. I have plenty of cut off wheels. I may get them installed incase next 6 months...haha.

Sent from my SM-G973U using WAYALIFE mobile app
 
rubiDave said:
Good job Dan. I found an angle grinder beneficial with the rockstar install.

As far as greasing the rear LCAs I found a 90 degree adapter that works to grease mine. Got mine at oreilly's not Amazon.View attachment 345269

Sent from my SM-G965U1 using WAYALIFE mobile app
Click to expand...

BaddestCross said:
I used that adapter for awhile, but I started using a needle point to grease them and it works a lot better.



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
Click to expand...

I’ve got a needle nose so will try that first .

Brute said:
Looking good brah...
Click to expand...

jdofmemi said:
Looking good Dan
Click to expand...

Thanks. Figuring out installs 1 mod at a time . The rockstar skid install was pretty involved for me . Watching Eddie do it on the write up .. I was not prepared for the issues that came up with the stock brackets both axle and frame side being so jacked up .

Haven’t built up the courage to do the transmission filter and fluid even though everything is just sitting here .

Coming up on 3 years in July . 34k miles since I got the Jeep

IMG_7208.jpg


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top Bottom