2013 Billet JKU Rubi Build Thread
- Thread starter mrmet1983
- Start date
mrmet1983
New member
Despite what people say about smittybilt their oversized tire carrier is so much stronger than the stock carrier and provides plenty of support for my 35 
Also got my Evo crossmember skid installed And I'm very impressed with it!! This thing looks like it can take a beating.
Got to love how it's the only clean thing under my jeep
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
Also got my Evo crossmember skid installed And I'm very impressed with it!! This thing looks like it can take a beating.
Got to love how it's the only clean thing under my jeep
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
Moochie
Active Member
Don't worry about what other people say. If it takes care of your needs, that's what is important.
Clarker
New member
just tumbled into this thread....I'm in Rockland County NY and would definatly be interested in Rauch or upstate trip to get my rig dirty!
mrmet1983
New member
just tumbled into this thread....I'm in Rockland County NY and would definatly be interested in Rauch or upstate trip to get my rig dirty!
End of the summer I think is the next trip
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
Skid_Kid
New member
Looking good!!!!! I still need to get mine welded.
mrmet1983
New member
Thanks my buddy did them for me in 2 hours
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
OverlanderJK
Resident Smartass
2013 with that much rust already.
mrmet1983
New member
2013 with that much rust already.
Welcome to the northeast
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
OverlanderJK
Resident Smartass
I don't miss it at all.
mrmet1983
New member
I will be taking a trip out west in the spring and have a feeling I might never come home.
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
mrmet1983
New member
Front end all finished and driving fine !! Used a pen cap with a slice down the side to hold that locker sensor open when putting carrier back In 
really hard to get a good pic after I got carrier in and wasn't taking it out just for a picture
set it all back up torqued it down and got ready for paint test. Markings were dead on so closed it up filled her with gear oil and out I went. Being my first time dealing with a locker I was a little nervous but after the test drive with not a peep from front or rear diff I knew I'd be fine.
2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
really hard to get a good pic after I got carrier in and wasn't taking it out just for a picture set it all back up torqued it down and got ready for paint test. Markings were dead on so closed it up filled her with gear oil and out I went. Being my first time dealing with a locker I was a little nervous but after the test drive with not a peep from front or rear diff I knew I'd be fine. 2013 JKUR 4" Enforcer lift w/ 35" fierce attitude MTs , RR modular front bump w/ warnvr8k
