Enforcers Unite!

[chipper]

Finally I can post here and be proud to be a part of this fine group. After I was informed on how to correctly measure my lift, and calling Evo. I quickly realized I have the correct coils. I ended up with 3 1/2" rear and 4" in front, but that's because I have NO weight front or rear.
This is a 3" enforcer on 35's
Stock

Enforced

 

[Rccrwlr]

Finally I can post here and be proud to be a part of this fine group. After I was informed on how to correctly measure my lift, and calling Evo. I quickly realized I have the correct coils. I ended up with 3 1/2" rear and 4" in front, but that's because I have NO weight front or rear.
This is a 3" enforcer on 35's
Stock
View attachment 116893
Enforced
View attachment 116894View attachment 116895

Looks really good with the 35's and uncut flairs. Have you done a flex test? Do they rub at all at full stuff?

 

[chipper]

Looks really good with the 35's and uncut flairs. Have you done a flex test? Do they rub at all at full stuff?

Not yet. Haven't had a chance yet. When I do I'll let you know

 

[catahoula]

Bump request for some more 2 dr rigs!:thumb:

 

[Panda]

Bump request for some more 2 dr rigs!:thumb:

Here ya go.. 3 inch enforcer is 4 inches of lift for a 2 dr

 

[catahoula]

Here ya go.. 3 inch enforcer is 4 inches of lift for a 2 dr View attachment 118742

I dig your rig Panda! Turned out sweet. I gotta get that lift. I was going to get 33" tires now I'm really thinking 35's.

 

[catahoula]

Hey Panda,

What size shocks did you go with?

 

[Panda]

Hey Panda,

What size shocks did you go with?

Thank you sir! My shocks are the bilstein for 3inch + lift which may require coil retainers but give great flex
And go with the 35's you'll regret smaller

 

[catahoula]

Thank you sir! My shocks are the bilstein for 3inch + lift which may require coil retainers but give great flex
And go with the 35's you'll regret smaller

Thanks dog! Yeah, I got a ways to go before tires and KNOW I will have tire envy if I were to get 33's.

 

[chipper]

Looks really good with the 35's and uncut flairs. Have you done a flex test? Do they rub at all at full stuff?

Finally got a chance to do a flex test. The only place it rubbed was the stock front bumper. Looks like I'll be hack saw this weekend.

 

[Smeddy343]

Prices?

Hey all...

May I ask what I should expect to pay a shop to install a 4" Enforcer?... Need ballpark numbers to get an idea if a shop will be charging too much. Thanks!

 

[branman]

Around 7 hours

 

[JAGS]

Hey all...

May I ask what I should expect to pay a shop to install a 4" Enforcer?... Need ballpark numbers to get an idea if a shop will be charging too much. Thanks!

This also depends on what else might be needed beyond just the lift. Example: regear, LCA skids, gussets, driveline, etc.

Around 7 hours

This might be a fair start...give or take.

 

[Torqt JK]

Wow, can't believe I haven't posted to this thread before now. Here's my 4" Enforcer 35" toyo

 

[Jaydoc1]

Hey all...

May I ask what I should expect to pay a shop to install a 4" Enforcer?... Need ballpark numbers to get an idea if a shop will be charging too much. Thanks!

Call Wes Blackie at Trail Jeeps in Golden and he will give you a right on the money quote. You won't find a better shop in Colorado and don't think you'll find a better deal on the install either. Just picked mine up with my new Enforcer from them today. Going to post some pics tomorrow.

 

[LeJerk]

Call Wes Blackie at Trail Jeeps in Golden and he will give you a right on the money quote. You won't find a better shop in Colorado and don't think you'll find a better deal on the install either. Just picked mine up with my new Enforcer from them today. Going to post some pics tomorrow.

x2

They're a new vendor on here too: http://wayalife.com/forumdisplay.php?97-Trail-Jeeps

 

[Jaydoc1]

Here are a couple of the JK on 35s with the 3" Enforcer installed:

 

[Smeddy343]

x2

They're a new vendor on here too: http://wayalife.com/forumdisplay.php?97-Trail-Jeeps

Call Wes Blackie at Trail Jeeps in Golden and he will give you a right on the money quote. You won't find a better shop in Colorado and don't think you'll find a better deal on the install either. Just picked mine up with my new Enforcer from them today. Going to post some pics tomorrow.

Thanks guys! I will give them a call. Do you suggest I purchase the Enforcer package from them, or from an online vendor, and just pay for the labor through Trail Jeeps to install it?

 

[Jaydoc1]

Thanks guys! I will give them a call. Do you suggest I purchase the Enforcer package from them, or from an online vendor, and just pay for the labor through Trail Jeeps to install it?

You won't beat their price and they typically have everything in stock.

 

[Smeddy343]

Spoke with Wes at Trail Jeeps and I am incredibly impressed with his quote. I think I have found who I'll be giving my business!

One thing though, Wes suggested I run a 3" Enforcer since I have flat fenders...I will be running 37s so I want to hear all of your suggestions for running a 3" or 4" on my Jeep...