What was done to your rig this week?

[jagrubb99]

Picked up a Rubicon disconnect sway bar on CL for $150. Slapped an EVO NoLimits on it and some new bushings, pretty solid setup. No more getting on my knees in the mud (that's what she said) to reconnect!
View attachment 217567
View attachment 217568
View attachment 217569

Does the rubi sway bar require different size bushings than standard? Or were yours just shot?

 

[Stotch]

That's exactly what I currently want to do. Craigslist has one for ny but for $900 and no junkyard has them. So I guess I have to wait. But awesome modification.

Yeah, I got lucky. He had it listed for $450, but didn't have the bushings or retainers or any of the electrical. Talked him down quite a bit :thankyou:

Does the rubi sway bar require different size bushings than standard? Or were yours just shot?

Mine were shot. First time I disconnected the bar swung free and hit the tie rod. Then I noticed I could shake it in the bushings with my hands...

 

[DNTTRD]

Installed an Adams Front Driveshaft Friday then took it to Gray Rock ORV and rode some Saturday after the SRRS races.

 

[Esum2016]

stock works but......

i finally made good use of some wheels a fellow Wayalifer passed a long and slapped some decent rubber on. Thanks Benatc1. Definitely worth the run across Nevada.

 

[benatc1]

i finally made good use of some wheels a fellow Wayalifer passed a long and slapped some decent rubber on. Thanks Benatc1. Definitely worth the run across Nevada. View attachment 217643

they look awesome dude! glad we made it work and it's quite a difference from the stockers you had! glad you like em!!

 

[JK07]

Replaced my faded factory rear bumper. Installed my new to me PS rear bumper for the AEV carrier. I took a few extra minutes to paint the exposed tub area black. Not doing LEDs for now so I added some mesh. I like the result!

 

[swampdog]

Replaced my faded factory rear bumper. Installed my new to me PS rear bumper for the AEV carrier. I took a few extra minutes to paint the exposed tub area black. Not doing LEDs for now so I added some mesh. I like the result!
View attachment 217703

Looks good. That mesh in the bumper is good for at least another 2 mph in the trap.

 

[JK07]

Looks good. That mesh in the bumper is good for at least another 2 mph in the trap.

Thanks! I was thinking it was good for at least a 1 mph gain but I'll take 2! Now if I add some stickers...

 

[dchotrod]

Nice.

About every other day I almost hit the place order button for a LOD roof rack. Would definitely free up some room inside.

Thanks. It's solid for sure. I thought REALLY hard about the LOD rack. There's a guy on here in Pa selling one for a sweet deal & had I seen that before I ordered this I would have gotten it. The big difference for me is the weight. I think the LOD is around 80-100 lbs more than the Gobi.

 

[thardy]

I put it off for a while as well. Figured I would just get into it. All carpet is out except driver side. Passenger seat is out.
I read somewhere that gain dish soap softens the sound goop. I spread some on it and then, after a day or two soak time, used a hammer and putty knife to chip it out. Wasn't too hard, just time consuming.

If you haven't completed this yet, dry ice is your friend.

 

[Clifford33]

Finally installed my genright tire carrier and metal cloack fenders. View attachment 217518View attachment 217519

Looks really good!!

 

[cozdude]

I threw some retards onto my tires since the tread was getting low
.

 

[GraniteCrystal]

Ha nice. Hope you get some good mileage out of them. The one on the right looks a few treads short of a full tire.

 

[WJCO]

I threw some retards onto my tires since the tread was getting low
.

I'll bet that's causing your shimmy and clunk noise. But you went ahead and bought ProSteers hoping to fix it. :grayno:

 

[bigcale]

I threw some retards onto my tires since the tread was getting low
View attachment 217773.

Watch out, the one on the left might deflate on you.

 

[Clutch]

I threw some retards onto my tires since the tread was getting low
View attachment 217773.

Smart, that ought to hold you over for awhile!

 

[Labricon]

Impressive mod! Mine was more mundane....antennaX

 

[AlStew]

Favorite part about my new evo fascia

 

[highoctane]

Got the Evo Mfg mini liners and Warn Zeon 10 winch installed.

 

[mstraw9379]

If you haven't completed this yet, dry ice is your friend.

I did the patch in the back. Have t done the fro t seat areas yet. Will vet some dry ice.