What was done to your rig this week?

Finally got these suckers installed. Im lovin the increase in Horse Power and ground clearance these puppies got me.

201.jpg207_134559.jpg2013020.jpg
 
Majik said:
A few accessories: tow hitch D-ring, new thimble for winch, and license plate mount that snaps into fairlead. Had to modify the mount so it would sit lower to clear my light bar and front camera. My two year old has his hand helping in a few pics :)

<img src="http://wayalife.com/attachment.php?attachmentid=15127"/>

<img src="http://wayalife.com/attachment.php?attachmentid=15128"/>

<img src="http://wayalife.com/attachment.php?attachmentid=15129"/>

<img src="http://wayalife.com/attachment.php?attachmentid=15130"/>

<img src="http://wayalife.com/attachment.php?attachmentid=15131"/>
Click to expand...

Looks good!
 
Majik said:
A few accessories: tow hitch D-ring, new thimble for winch, and license plate mount that snaps into fairlead. Had to modify the mount so it would sit lower to clear my light bar and front camera. My two year old has his hand helping in a few pics :)


View attachment 15127



View attachment 15128



View attachment 15129



View attachment 15130



View attachment 15131
Click to expand...

What does your front bumper camera hook to? Interesting Idea.

I have never run a front license plate in the year I've had my Jeep. I drove to Destin FL and never had any issues so I haven't worried about it but I like your idea of clipping it to the fairlead. Does it stay at 70/80 mph? :thumb:
 
Installed RR snorkel. Plasi dipping the grill will be next weeks project along with teraflex extended brake lines.
 
Cpfiremn said:
For some reason I can't upload the pics from my phone, it has problems sometimes. I'm still trying to upload them. I have a 09 JKU 3.8
Click to expand...

I uploaded pics to jk forums under the writeup section. I did not do a writeup for the forum, but will be one on offroad.com in about a month.
 
The new one isn't designed for the 2 door. I used the 07-11 system which fits on both 2 and 4 doors from that year. The hangars are really close but I was able to make it work with one mount by twisting the rubber hangar. I am looking for some different rubber hangars that might work better but I was able to make it work. You can see the hangar in the pic
I also had 2 inches cut off the intermediate pipe and 1 inch cut off the tailpipe.
ImageUploadedByWAYALIFE1360446520.286858.jpg
 
SoCalDozer said:
The new one isn't designed for the 2 door. I used the 07-11 system which fits on both 2 and 4 doors from that year. The hangars are really close but I was able to make it work with one mount by twisting the rubber hangar. I am looking for some different rubber hangars that might work better but I was able to make it work. You can see the hangar in the pic
I also had 2 inches cut off the intermediate pipe and 1 inch cut off the tailpipe.
View attachment 15349
Click to expand...

Good for you. I bet it sounds great. I'll have to opt. for something like the rockcrawler system I guess. hope it still sounds as good.
 
Gibbo said:
Good for you. I bet it sounds great. I'll have to opt. for something like the rockcrawler system I guess. hope it still sounds as good.
Click to expand...

It sounds awesome. I would go for the competition system if that's what you want. Really isn't hard to make work at all. Exhaust shop would probably only charge 50 bucks to install it and put new hangars on.
 
Custom mounted flowmaster 40 series.. literally only drove it 1 mile from the shop to the office.
Under 3k rpm sounds nice and throughty... over 3k rpm... sounded a little bee like... hope i like it...
 
Heres the pic...
 

Attachments

  • ForumRunner_20130209_181829.png
    ForumRunner_20130209_181829.png
    426.9 KB · Views: 327
  • ForumRunner_20130209_181843.png
    ForumRunner_20130209_181843.png
    463 KB · Views: 326
You must log in or register to reply here.
Top Bottom