What was done to your rig this week?

spinuck said:
It was nice meeting you Jody. It was nice and dry when I rolled out Saturday, but I could see the dark clouds building up though leaving Loon Lake.

Isnt it gonna get expensive powder coating the rails each time they get scratched up? I'd just rattle can them. Although I cant take mine off either.
Click to expand...

It was nice meeting you and your family as well. I suppose it'll get expensive but i really screwed up the coating this time so i gotta keep the '14 clean for at least a year lol.
 
Last edited:
ARB On-Board Air Compressor mounted and connected to sPOD w/Otrattw Switches

ARB and sPOD.jpg


ARB EVO mount.jpg


Otrattw Switches.png

Planning to install Air Tank later on
 
OverlanderJK said:
I did that. Are you thinking of doing it?
Click to expand...

I haven't decided. I already have wiring and a switch ran to run my front light, I just haven't mounted it yet. I do like the idea of using factory wiring, just not being able to run it with brights is the only thing holding me back.
 
StrizzyChris said:
I haven't decided. I already have wiring and a switch ran to run my front light, I just haven't mounted it yet. I do like the idea of using factory wiring, just not being able to run it with brights is the only thing holding me back.
Click to expand...

It's a lightbar. You really think your brights are going to do any good when that's on?
 
Replaced the locker actuator plug, inspected gears while I had the cover off, and installed the Currie Johnny joint in the housing. New one was easier to install than getting the old one out. Air hammer made quick work of it. :thumbup: now to just get a welder and do the other one...
 

Attachments

  • 1406401277143.jpg
    1406401277143.jpg
    78.4 KB · Views: 353
rinkishjk said:
Replaced the locker actuator plug, inspected gears while I had the cover off, and installed the Currie Johnny joint in the housing. New one was easier to install than getting the old one out. Air hammer made quick work of it. :thumbup: now to just get a welder and do the other one...
Click to expand...

What part number is this and where did you get it? Thanks!
Edit, this is the front. I'm stupid.
 
Last edited:
olram30 said:
What part number is this and where did you get it? Thanks!
Edit, this is the front. I'm stupid.
Click to expand...

Yes it's the front axle... And for anyone who needs this plug don't waste your time buying it from quadratec, who says it's in Stock. I called them a week and a half later and they said they were having trouble getting it, yet on their website it says in Stock! Dealer took 3 days to get it. It's part #68003570AA.
 
Broke my lower control arm bracket yesterday on the trails... came back home with a ratchet strap holding it ... 95miles drive home... took almost 3hrs, fun drive !
10584097_10154442332495301_468831837648708235_n.jpg

so today was fix it time ...
10513425_10154443718355301_7572466501520828009_n.jpg
10583960_10154443738335301_153135283731657393_n.jpg

now all fixed, until the replacement comes in !
10276984_10154444645110301_1544885830551486462_n.jpg
10487375_10154444644870301_2282821315601371472_n.jpg

and I got a inner seal that started leaking .... gotta fix that too ..
 
You realize you can take off a control arm and drive like that right? I've driven mine with a missing control arm for over a week before.
 
Plumbed, wired, and mounted OBA this week. Also leak checked, and fixed said leaks. :thumb:
 

Attachments

  • IMG_3848.jpg
    IMG_3848.jpg
    149.8 KB · Views: 326
You must log in or register to reply here.
Top Bottom