What was done to your rig this week?

Armydog · Mar 18, 2014

Munday said:
A few new shots of the rig .... Just got the EVO rears and carrier installed along with the Snorkel and a bunch of other goodies ..... Already have plans for the next phase

Dude, nice rig. How do you like the old school warn winch. That's the 8274 right? Are you running steel or synthetic line? How long of a line can you fit? I love that winch, tell me what you think of it. Tango

Sent from my iPad using WAYALIFE mobile app.......

loscann48 · Mar 18, 2014

Woody3 said:
Where did u get the cubes?

Sent from my iPhone using Tapatalk

I bought them because they weren't cubes... They are round LEDs. Got them off Amazon, didn't come with switch or wiring, but I had everything except a fuse and a switch. If I paid $100+ for these, I might be disappointed, but for the price, no complaints. The sign and playground in the photos is about 50 yards away....there is absolutely no ambient light present in the area, just the lights on my rig
Sent from my SCH-I535 using WAYALIFE mobile app

Jiffy05 · Mar 18, 2014

Rccrwlr said:
Looks like u made a few passes. Initial masking is diff than final cut. Looks good

I helped him with it and we started off using a dremel until it died after a few minutes of use(don't get the 4200 dremel). Then we didn't have anything else to cut with so we went and bought a cheap saw from harbor freight. We did a lot of debating on how to cut it before we did it though and during.

HDGasser · Mar 18, 2014

Jiffy05 said:
I helped him with it and we started off using a dremel until it died after a few minutes of use(don't get the 4200 dremel). Then we didn't have anything else to cut with so we went and bought a cheap saw from harbor freight. We did a lot of debating on how to cut it before we did it though and during.

I did mine today and used a 4" grinder with a cut off wheel. Worked great till I realized I was wearing a short sleeve shirt and HOT liquified plastic started flying!!!

I'll post up some pics tomorrow.

Jiffy05 · Mar 18, 2014

HDGasser said:
I did mine today and used a 4" grinder with a cut off wheel. Worked great till I realized I was wearing a short sleeve shirt and HOT liquified plastic started flying!!!

I'll post up some pics tomorrow.

:cheesy: My buddies wife was covered in that plastic after we got half a fender cut.

Woody3 · Mar 18, 2014

Forget the fenders, post up pics of the red sores. Lol

Sent from my iPhone using Tapatalk

StrizzyChris · Mar 18, 2014

HDGasser said:
I did mine today and used a 4" grinder with a cut off wheel. Worked great till I realized I was wearing a short sleeve shirt and HOT liquified plastic started flying!!!

I did the same thing(pics posted in my thread of the chop) but almost got it in the eye before realizing that I forgot my goggles

Jiffy05 · Mar 18, 2014

StrizzyChris said:
I did the same thing(pics posted in my thread of the chop) but almost got it in the eye before realizing that I forgot my goggles

That would have been bad. I hardly ever work anymore without safety glasses. I have had way too many close called. One which left a scar on the bridge of my nose.

jbaskin28 · Mar 18, 2014

Finally home to my jeep after a long year.

Inventoried all of my deployment purchases

ImageUploadedByWAYALIFE1395130609.523548.jpg

And installed my AFE CAI. I need to wash the engine bay of the dirt and mud :/.

ImageUploadedByWAYALIFE1395130633.292150.jpg

And my Trucklites

ImageUploadedByWAYALIFE1395130672.542722.jpg

ImageUploadedByWAYALIFE1395130683.224425.jpg

jelliott076 · Mar 18, 2014

hdawgn40 said:
Finally got to upload my pictures of my trucklites, and my evo sliders evo coilovers next:thumbup:

I like what you've done to it! I'm knee deep in the weeds on this transmission deal otherwise that's where my $ would've gone. :doh:

Simmons · Mar 18, 2014

noroad said:
Well i hooked up my green inside lights pics dont do them justice have to take better ones later. Also made an opps well placing a light, knocked a full beer over onto the back rug! any one have a good way to clean it the smell might get me arrested lol
From the back<img src="http://wayalife.com/attachment.php?attachmentid=73513"/>
Front dside<img src="http://wayalife.com/attachment.php?attachmentid=73514"/>

Looks awesome man.
Just hand wash it out and when your done put a lil shampoo in a spray bottle and the rest with water shake well spray make it spell good inside and cheaper then the stuff you can buy.

raginkgin1 · Mar 18, 2014

Added Rugged Ridge Bug Shield. Second MOD done to Rubie that required drilling into metal. Strange that I am getting used to putting a drill bit into a $40K vehicle 6 months old.

ssh6314 · Mar 18, 2014

New lights inside. Something small but looks good. Cheap.

Sent from my SM-N900P using WAYALIFE mobile app

thetrifakta · Mar 19, 2014

So I noticed a few drops here and there in the driveway, didn't see anything coming off the oil pan or oil filter.... Looked a little closer and saw this area gunked:

So then I found out that this a recall. First I checked at this website:

Jeep WRANGLER Recalls - DealerRater

It said:
"CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2008 JEEP WRANGLER VEHICLES MANUFACTURED FROM JUNE 2006 THROUGH JULY 2008, EQUIPPED WITH AUTOMATIC TRANSMISSIONS. THESE VEHICLES WERE NOT EQUIPPED WITH A TRANSMISSION FLUID TEMPERATURE WARNING SYSTEM".

So I called the dealership, they ran my VIN and I dropped her off today for the repair!
I'll let ya know if anything weird comes up.

Hack12 · Mar 19, 2014

thetrifakta said:
So I noticed a few drops here and there in the driveway, didn't see anything coming off the oil pan or oil filter.... Looked a little closer and saw this area gunked:

View attachment 74381

So then I found out that this a recall. First I checked at this website:

Jeep WRANGLER Recalls - DealerRater

It said:
"CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2008 JEEP WRANGLER VEHICLES MANUFACTURED FROM JUNE 2006 THROUGH JULY 2008, EQUIPPED WITH AUTOMATIC TRANSMISSIONS. THESE VEHICLES WERE NOT EQUIPPED WITH A TRANSMISSION FLUID TEMPERATURE WARNING SYSTEM".

So I called the dealership, they ran my VIN and I dropped her off today for the repair!
I'll let ya know if anything weird comes up.

Below is a link to my thread from a while back. It isn't a recall, it's an extended warranty issue. You'll be able to have them replaced free of charge whether you're the first owner or not.

Transmission Line Leak
http://wayalife.com/showthread.php?t=5434

thetrifakta · Mar 19, 2014

Hack12 said:
Below is a link to my thread from a while back. It isn't a recall, it's an extended warranty issue. You'll be able to have them replaced free of charge whether you're the first owner or not.

Transmission Line Leak
http://wayalife.com/showthread.php?t=5434

Right on. Yeah. The guy just said "recall" either way, I don't have to pay for it! Yes!!!

Hack12 · Mar 19, 2014

thetrifakta said:
Right on. Yeah. The guy just said "recall" either way, I don't have to pay for it! Yes!!!

Exactly! :cheesy:

They can call it whatever the hell they want as long as they don't charge you anything!

09blackruby · Mar 19, 2014

Simmons said:
Looks awesome man.
Just hand wash it out and when your done put a lil shampoo in a spray bottle and the rest with water shake well spray make it spell good inside and cheaper then the stuff you can buy.

I spilled a beer in my jeep while we were camping.. All we had was orange smelling fabreze. Don't do that! When it gets hot and humid it stinks.. My jeep was brand new... I was so pissed... Oh well, live and learn...

NAUJK · Mar 19, 2014

I got my ARB On-Board Air system installed, in the campground in Moab! Thanks to Eddie and his write up!!

No pictures of the compressor but got pictures of Moab!