What was done to your rig this week?

[wjtstudios]

Yeah I could see how that would make for more issues, unfortunately. Good thing that Scrambler wasn't the recipient!!!

For sure

 

[DaJudge]

Rear main seal. I have a stroker coming in December but it was leaking so bad I was concerned it would completely fail.

 

[Andy5160]

TMR diff covers went on. Very happy with how it turned out.

 

[Midnsped]

Just had 5.13s installed by Hammer Down Offroad in Mont Alto, PA. Rick did a great job at a extremely fair price. Check him out if you are in the PA, MD area.

 

[Seahawkfan]

 

[wjtstudios]

View attachment 367642

Awesome!! Only way to go

 

[Seahawkfan]

Got my new to me EVO liners installed. Thanks Clay (AZVA). I think they mounted up nicely with the Nemesis fenders.
Only thing I need to work on is the CO reservoirs. Really no access to the adjusters. Any ideas on how to mount for better access ??

 

[WJCO]

Oil change #8 on the JT.

Exciting pictures:

 

[Weebz]

Just had 5.13s installed by Hammer Down Offroad in Mont Alto, PA. Rick did a great job at a extremely fair price. Check him out if you are in the PA, MD area.

Rick does good work. He is a hell of a fabricator too

 

[JT@623]

Dropped the Jeep off at Motech a few days ago to have some additional trans cooling added similar to Moby . Summer time will tell but it looks like about a 30 degree drop in temps . I pushed it a little bit on the way home the highest temp I saw was 147 without running the fans .
Rail cooler on the passenger side and dual fan cooler where the muffler used to live.

 

[-AINOKEA-]

Finally got the elements mounted on the slide and bolted to the bed of the JTR. Used M8 bolts and nutserts on the ridges of the bed. Much more peace of mind leaving it outside while shopping and it won’t bounce all over the place when I go over speed bumps.

 

[Bullwinckle]

Finally got the elements mounted on the slide and bolted to the bed of the JTR. Used M8 bolts and nutserts on the ridges of the bed. Much more peace of mind leaving it outside while shopping and it won’t bounce all over the place when I go over speed bumps.

View attachment 368495

Looks great! I need to do this for my fridge but still deciding if I want the decked system or not.

 

[KevinG]

After being a dumbass in Sand Hollow in May I finally got around to putting on new rear corners. Different brand from the previous ones made it a little bit of a pain. Still have to weld on the tabs for the tire carrier.

 

[WJCO]

Big stuff. I did the 'turn back the clock' mod on ours. Such intense excitement that I forgot to take pictures.

 

[J&k_Overland]

Building a storage system for the WJ. Using Milwaukee’s pack out system. Over the Engels

 

[black pearl]

My father in law stopped by today, said his Jeep was making an odd clunking sound and felt really washy in the ass end. So took a look for him and found this. So pulled it apart and got it back together for him.

 

[Jsouder53]

My father in law stopped by today, said his Jeep was making an odd clunking sound and felt really washy in the ass end. So took a look for him and found this. So pulled it apart and got it back together for him.

That’ll do it. Good find!

 

[black pearl]

That’ll do it. Good find!

When I found it I just started laughing. He didn’t find it as funny, but was very glad it was fixable and didn’t cause more damage.

 

[CrazyTrainJK]

Installed my new CavFab 1.5 ton steering drag link flip and really like it.

 

[JT@623]

Out of curiosity and some money burning a hole in my pocket . I took the Jeep to a reputable dyno shop . The LT1 10 Speed made 335 horsepower & 375 ftp of torque. With just a few minor tweaks to the tune .