What was done to your rig this week?

jdofmemi said:
That's super nice.

I bet you could sell a bunch of them if you built them.
Click to expand...

Thanks. I made it removable in just a minute or two and it’s fully fused with a quick disconnect 4ga plug running off a 100 amp fuse. It was a fun and practical project.


Sent from my iPhone using WAYALIFE
 
Finished clearancing the front passenger side fender to stuff a 37 on 3" of lift. 30 grit 4" flap wheel made quick work of the pinch seam and edge of the fender. Now it will only rub the frame and LCA...haha.20200306_122021.jpg

Sent from my SM-G973U using WAYALIFE mobile app
 
Last edited:
Well the boss lady wanted all the stickers and badges removed from the JT. I took them off since it’s her rig, and I want her to like it before she cuts me off from buying shit. So anyway I took the Jeep badges off the tailgate and found these lovely holes in the back... fml

60426635780__0CB1867E-13A9-4AF1-AE10-BB263DDC194A.jpg

Took it to the shop and had them fill/paint it. Looks better than the holes, but idk how I feel about it altogether. Looks kinda plain to me.

IMG_0192.jpg

Adjustments.jpg

Kinda reminds me of Sid the sloth. Lol


Sent from my iPhone using WAYALIFE
 
Last edited:
-AINOKEA- said:
Well the boss lady wanted all the stickers and badges removed from the JT. I took them off since it’s her rig, and I want her to like it before she cuts me off from buying shit. So anyway I took the Jeep badges off the tailgate and found these lovely holes in the back... fml


Took it to the shop and had them fill/paint it. Looks better than the holes, but idk how I feel about it altogether. Looks kinda plain to me.


Kinda reminds me of Sid the sloth. Lol
Click to expand...

Sounds like you need to man up.
 
-AINOKEA- said:
Well the boss lady wanted all the stickers and badges removed from the JT. I took them off since it’s her rig, and I want her to like it before she cuts me off from buying shit. So anyway I took the Jeep badges off the tailgate and found these lovely holes in the back... fml

View attachment 342620

Took it to the shop and had them fill/paint it. Looks better than the holes, but idk how I feel about it altogether. Looks kinda plain to me.

View attachment 342621

View attachment 342622

Kinda reminds me of Sid the sloth. Lol


Sent from my iPhone using WAYALIFE
Click to expand...

I think it would look good without the camera. Does look a little funky with the camera being the only thing there.


Sent from my iPhone using WAYALIFE
 
So this week I got my headlights speaker 8700s done had to buy the h13 to h4 connectors separately which north ridge does not tell you, looking nice then put in my flow master muffler outlaw series all black this is one of the best mufflers in my opinion got a roar to it when you punch it and when it idles or drive in low rpms it just purrs lol 59C3CD87-0FA0-41E4-B804-9A83C4B5D735.jpg


Sent from my iPhone using WAYALIFE
 
Did a chalk test, adjusted air pressure and reprogrammed the TMPS thresholds.

Ever since mounting Cooper STT Pro 295/70R17 on my stock 7 1/2” wheels I’ve been running 30psi. The ride was noticeably more rough than my old stock street tires.

The chalk test showed that 30psi was definitely to much pressure. I ended up at 25psi which gave me a much better contact patch and the ride improved a ton. I’m guessing that my narrow wheels creates a bunch of tire crown.

Think I’ll have any issues running the pressure that low? I noticed that the tires warmed up after a few miles of freeway driving and gained 3psi each.
 
sipafz said:
What did you replace it with? Thinking about a quicker solution myself.
Click to expand...

Picked up a take-off rubicon bar. I thought at first I could just wire it up to a switch and be all set, but after a little research I found out it’s not that simple. So I’ll eventually pick up the EVO air actuated setup.
 
You must log in or register to reply here.
Top Bottom