What was done to your rig this week?

[OverlanderJK]

Actually, I just got done installing one...

View attachment 19234

Copycat.

:cheesy:

 

[mn jk jeeper]

nothing on the cool mod side just a bunch of maintaince to get ready for spring wheelin
in the last couple of weeks I have
replaced the water pump and coolant and serp belt
changed oil and filter (from royal purple to mobile 1 full syn)
installed new front axle seals and new ten factory front axles
outter tube seals for front axle tubes
new ball joints
greased the wheel bearings hubs
cleaned and regreased the joints on the front and rear drive shaft
new brakes in all corners
replaced the brake lines with stainless steel ones
flipped my factory sway bar motor and cleaned the corrosion from the connector
cleaned and sealed all light connectors in all the exterior lights
ran all vent lines to the rear by spare tire
installed a tranny cooler
changed the t-case fluid
changed diff oil in rear diff
daystar top dash panel
ive got a little more to do but mainly getting to the cosmetic stuff now that its warming out finally

 

[paychex.308]

nothing on the cool mod side just a bunch of maintaince to get ready for spring wheelin
in the last couple of weeks I have
replaced the water pump and coolant and serp belt
changed oil and filter (from royal purple to mobile 1 full syn)
installed new front axle seals and new ten factory front axles
outter tube seals for front axle tubes
new ball joints
greased the wheel bearings hubs
cleaned and regreased the joints on the front and rear drive shaft
new brakes in all corners
replaced the brake lines with stainless steel ones
flipped my factory sway bar motor and cleaned the corrosion from the connector
cleaned and sealed all light connectors in all the exterior lights
ran all vent lines to the rear by spare tire
installed a tranny cooler
changed the t-case fluid
changed diff oil in rear diff
daystar top dash panel
ive got a little more to do but mainly getting to the cosmetic stuff now that its warming out finally

wow! that is some list!

andrew -

 

[jeramiej]

Installed my ACE sliders this weekend, loving them so far. The step is a great help for the kids ad they look good also

 

[gtony12]

Just finished the coilover install by getting the new control arms on, extended the axle breathing tubes, and bled the brakes...

I had to let a little air out of the rear tires to get it out of the garage, but got to take it on its first test drive! 

View attachment 19245

Dammmmmmmmmmmmm, that looks great! :thumb:

 

[Jeeper714]

Installed winch, RC stubby hybrid bumper and painted the grill!

 

[OverlanderJK]

Installed winch, RC stubby hybrid bumper and painted the grill!

I wasn't sure how that bumper would look but I kind of like it. Nice work!

 

[ProfessionalDriver]

Looks awesome! When we going to freeway ridge?

Soon... Need to get a front driveshaft in and dial in a few things, but hopefully I'll be trail ready within the next few weeks.

The jeep is looking really sweet! I dig the black on black theme!

Thanks Greg! I'm loving the wheels!

Man your Jeep is looking awesome!! :thumb:

Thanks Eddie! I'm really excited about it, rides really nice!

Holy cow Bryan that looks beautiful! Congrats man.

Thanks Frank!

Looks great! Hopefully you be able to make a SnG soon so I can see this in person. Im jealous!!

Thanks! No need to be jealous, I don't even have 4 wheel drive right now! :cheesy: I'm hoping to make it to the next Suds-N-Grub... Hopefully we aren't too busy at work so I can break away.

Your rig is looking quite good!

andrew -

Really diggin it! Sweet looking rig! :2thumbsup:

:thumb: Looks great

Dammmmmmmmmmmmm, that looks great! :thumb:

Thanks! I'm really liking it! I'm going to try and do a write-up of my installation experience and get some more pictures up...

 

[MTG]

Just finished the coilover install by getting the new control arms on, extended the axle breathing tubes, and bled the brakes...

I had to let a little air out of the rear tires to get it out of the garage, but got to take it on its first test drive! 

View attachment 19245

This looks awesome! :thumb:

I love black on black. I was close to getting black, but one black vehicle in the house is enough. :yup:

 

[ProfessionalDriver]

This looks awesome! :thumb:

I love black on black. I was close to getting black, but one black vehicle in the house is enough. :yup:

Thanks Mike! I've always been a fan of black on black! I know what you mean about black vehicles, we are a two black vehicle household and keeping them both clean is a pain in the ass... I think I need to attend The GCM 2 School of Vehicle Detailing! :yup:

 

[mcpuck]

Just finished the coilover install by getting the new control arms on, extended the axle breathing tubes, and bled the brakes...

I had to let a little air out of the rear tires to get it out of the garage, but got to take it on its first test drive!

View attachment 19245

Looking good!!! Now get that thing out and see the difference quality suspension can make!

 

[StrizzyChris]

Installed winch, RC stubby hybrid bumper and painted the grill!

Wow...I really like the look of that bumper!

 

[NAUJK]

So this last Thursday I put on my new OR-Fab tire carrier. So far I love it! Very solid easy to use and I like the look. Now to just fill it out with a full sized spare tire :cheesy:. Also need to find a more permanent spot for the license plate.

 

[berry2k]

Installed LOD sliders this weekend

Sliders went on easy

 

[Philip *AZ*]

Painted my stockers.. Looks pretty good!


Paratroopers stay up longer!

 

[luisslaraa]

Lift + Wheels...!

finally got my lift and wheels!!

 

[my_jk]

finally got my lift and wheels!!

Looks good :thumb:

 

[Philip *AZ*]

Guess I could have posted a pic.. That might help..


Paratroopers stay up longer!

 

[Rascal3]

Nice touch Phil, looking good.:thumb:

 

[jeek.olllllllo]

I just painted a old plate i had laying around and put my jeeps name on it!