What was done to your rig this week?

[rogerk93]

So a few things changed on the jeep first I added a rock hard front and rear cage plus the c-pillar brace and harness bar secondly I'm painting the inside of my hardtop black.

Sent from my VS990 using WAYALIFE mobile app

 

[notnalc68]

I had a busy weekend last week. Friday night I installed Cobra Lt CB above my mirror.
I also installed Evo Quarter Pounder and Stinger.
Saturday was and epic install day for me anyways. I just got my Rock Hard roll cage back from powder coating semi gloss and installed it.
If that wasn't enough I wired up and installed my Switch-Pro. Mounted it on my roll cage for now. My kids like it their. Wanted to mount it to the left of the steering wheel but to scared at the moment to cut a whole in the dash to mount a clean look.
And if that wasn't enough I tackled the Evo Leveling kit. Wasn't as hard to install as I though it would be. The ride is absolutely amazing.

Sent from my iPhone using WAYALIFE mobile app

Good work. It looks great!


Sent from my iPhone using WAYALIFE mobile app

 

[BaddestCross]

I finally got the inserts painted and installed on my sliders...



Also installed the CB mount...





Sent from my SM-N915P using WAYALIFE mobile app

 

[Robertcrav]

Let's see...installed some Ace Engineering inner fenders, Drake Hood pins and installed some gas struts to hold up the lid of my Tuffy security enclosure


Ohhh...and bought my wife a 2017 Granite Crystal Hard rock


Sent from my SAMSUNG-SM-N920A using WAYALIFE mobile app

 

[BaddestCross]

Ohhh...and bought my wife a 2017 Granite Crystal Hard rock
View attachment 229725

Nice! [emoji106]

Sent from my SM-N915P using WAYALIFE mobile app

 

[WJCO]

I finally got the inserts painted and installed on my sliders...

Nice color match. Looks good.

Ohhh...and bought my wife a 2017 Granite Crystal Hard rock

Congrats on the new Jeep.

 

[WiscoHR]

Finally got rid of that giant muffler out back. And installed a Dynomax exhaust.


Sent from my iPhone using WAYALIFE mobile app

 

[catahoula]

Let's see...installed some Ace Engineering inner fenders, Drake Hood pins and installed some gas struts to hold up the lid of my Tuffy security enclosure View attachment 229723
View attachment 229724

Ohhh...and bought my wife a 2017 Granite Crystal Hard rock
View attachment 229725

Sent from my SAMSUNG-SM-N920A using WAYALIFE mobile app

Those liners are one of the nicest I have seen.

Congrats on the new jeep!

 

[Robertcrav]

Those liners are one of the nicest I have seen.

Congrats on the new jeep!

Thanks everyone...she loves it.

And the liners fit well and we're a very easy install...I drilled the extra hole for the 3/4" led marker

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[BaddestCross]

Nice color match. Looks good.

Thanks! It was a rattle can, so I was dubious about how close it would be.

Sent from my SM-N915P using WAYALIFE mobile app

 

[JKbrick]

Changing things up so I took off my JKS lift springs and put in 18/59 springs, then put my track bars and drag link back to factory positions.


Sent from my iPad using WAYALIFE mobile app

 

[SergJKURhino]

This weekend, I installed the ARB twin air compressor with the Innovative JK Products underseat mount & air line system. When all was said & done, it aired up two of my 315/70R17's at the same time from 12psi to 40psi in 3 minutes. NOTE: I typically ride on-road at 36psi...I just wanted to see how long it would take to get to 40psi.




Sent from my iPhone using WAYALIFE mobile app

 

[RebelconJk]

I finally got the inserts painted and installed on my sliders...
View attachment 229707
View attachment 229708

Also installed the CB mount...
View attachment 229709
View attachment 229710



Sent from my SM-N915P using WAYALIFE mobile app

Looks awesome dude! :thumb::hmm:

 

[Rjmancia]

This week... did the KARGO MASTER Rack with Safari Basket... also added the Smitty Built Hi Lift jack mount on tire carrier with my Hi Lift Jack.




Sent from my iPhone using WAYALIFE mobile app

 

[SPOOOBY]

Installed rugged ridge led,look great


If your not living and having fun,your dead already

If your not living and having fun,your dead already

 

[SPOOOBY]

new dual cb antenna setup


If your not living and having fun,your dead already

 

[Jeepfan30]

This weekend, I installed the ARB twin air compressor with the Innovative JK Products underseat mount & air line system. When all was said & done, it aired up two of my 315/70R17's at the same time from 12psi to 40psi in 3 minutes. NOTE: I typically ride on-road at 36psi...I just wanted to see how long it would take to get to 40psi.
View attachment 229983View attachment 229984View attachment 229985View attachment 229986



Sent from my iPhone using WAYALIFE mobile app

Very nice set-up. I may be asking Santa for that.

 

[SergJKURhino]

Very nice set-up. I may be asking Santa for that.

Thanks! If you do get this, let me make some suggestions...

1.Leave the compressor manifold perpendicular to the compressor rather than angle it like the instructions state. This will allow you to seat their T-fitting lower for a more secure attachment.

2.Disconnect the battery completely & secure the positive cable so that there's no chance of accidental contact prior to beginning the install. Otherwise, the onboard computer will sense that the passenger airbag sensor connectors have been tampered with & will shut off the passenger side airbag. The only way to re-engage the airbag is to take it into the dealership (or someone else that can clear codes (my reader didn't detect that code, so I will have to take it in to clear it)). Even this, I can't guarantee it'll work because I did so & still tripped the sensor.

If you have any questions during your install, feel free to message me (I didn't seen too much information out there on the install of this system, so I had to learn some things on the fly).


Sent from my iPhone using WAYALIFE mobile app

 

[Jeepfan30]

Thanks! If you do get this, let me make some suggestions...

1.Leave the compressor manifold perpendicular to the compressor rather than angle it like the instructions state. This will allow you to seat their T-fitting lower for a more secure attachment.

2.Disconnect the battery completely & secure the positive cable so that there's no chance of accidental contact prior to beginning the install. Otherwise, the onboard computer will sense that the passenger airbag sensor connectors have been tampered with & will shut off the passenger side airbag. The only way to re-engage the airbag is to take it into the dealership (or someone else that can clear codes (my reader didn't detect that code, so I will have to take it in to clear it)). Even this, I can't guarantee it'll work because I did so & still tripped the sensor.

If you have any questions during your install, feel free to message me (I didn't seen too much information out there on the install of this system, so I had to learn some things on the fly).


Sent from my iPhone using WAYALIFE mobile app

Thanks for the advice. Does the seat still have full range of motion?

 

[SergJKURhino]

Thanks for the advice. Does the seat still have full range of motion?

Yes. It's a well thought out design...just wished there was a way to install the bracket w/out removing the seat.


Sent from my iPhone using WAYALIFE mobile app