VIDEO : How to Install a Lift Kit on a Jeep Wrangler JL for Beginners

Ok, I’ve been watching this and other videos from Wayalife to prep for a small lift install on my JL.
The videos really help. My last lift install was 2008, so that and bad knees now, I was thinking maybe I shouldn’t. But with seeing the install video, it gives me a reference to go to. I’m hoping 2-3 hrs for each axle. I give myself 2 days to complete the job. So no rush anxiety.
over the years I’ve done of self installs / repairs with help from theses videos Eddie and Cindy make. I watched others and there’s no comparison to information, detail and quality.
So thanks for the help. Saved me at least $500.00.
When this is done, I’m ready for the trail!
 
wayoflife said:
Installing a lift kit on a Jeep Wrangler JL is a lot easier than you’d think and in this DIY video, made for beginners, we'll show you exactly how to do it. While the kit featured is made by Rancho, the step-by-step instructions will apply to most any standard coil and shock suspension system, from a basic 2” budget boost up to a 4”+ lift, complete with adjustable control arms and track bars. Of course, every tool you’ll need is identified, torque settings are stated and tips and tricks to help make the process easier, are provided as well. Trust me, this is something you can do!


#jeep #liftkitinstall #wayalife #jeepwrangler #wranglerjl #jlwrangler #jeepjl #jljeep #rancho #ranchosuspension #suspensionsystem #howto #diy #beginners

TOOLS YOU'LL NEED
• 8, 10, 13, 15, 18, 19, 21, 22, 24mm Sockets & Wrenches
• 9/16" Sockets & Wrenches
• 1-1/2" Crows Foot
• 18mm Crows Foot
• Ratchet
• Short Ratchet Extension
• Long Ratchet Extension
• Ft. Lb. Torque Wrench
• Vicegrips
• Floor Jack
• Jack Stands
• Pry Bar
• Rolling Head Pry Bar
• Trim Pry Tool
• Dykes
• Hammer
• Tape Measure
• Duct Tape
• Spray Mount

RECOMMENDED BUYS
Rancho Crawler Suspension System: https://amzn.to/3Nd0z8B
1/2" Impact Wrench: https://amzn.to/3WNeYLE
3/8" Impact Wrench: https://amzn.to/43nIKJo
3/8" Ratchet: https://amzn.to/43F2KqO
1/2" Ratchet Set: https://amzn.to/45JrvnD
Wrench Set: https://amzn.to/3NbsOEz
Gear Wrench Set: https://amzn.to/43Kn1Lt
1/2" Torque Wrench: https://amzn.to/42ihtqt
3/8" Ratchet Set: https://amzn.to/42rsGoK
1/2" Swivel Socket: https://amzn.to/3WYzkBR
1/2" Crows Foot Set: https://amzn.to/3OUCO6f
3/8" Crows Foot Set: https://amzn.to/3Nd7e2o
Pry Bar Set: https://amzn.to/3Cu6S1v
Rolling Head Pry Bar: https://amzn.to/3CdXdvH
Vice Grips: https://amzn.to/43pmsXS
Dykes: https://amzn.to/3IYLm8G
Hammer: https://amzn.to/43HjNIR
Trim Removal Set: https://amzn.to/3NaEOWW
Tape Measure: https://amzn.to/3OQGaaB
Floor Jack: https://amzn.to/3CiV1Tv
Jack Stands: https://amzn.to/3MSOLqu
Spray Adhesive: https://amzn.to/3CaVcQL


* Please note that the Amazon links posted are associate links and purchases made through them will help support this channel.
Click to expand...
Yellow Jeep? Rubicat back?
 
Awesome video Eddie and Cindy! Definitely will be helpful when I get my lift. Now just deciding between EVO and rancho but after this video I’m leaning towards ranchos 3 inch for the gladiator a little taller to give me the option to go 38s if I want. lol looking forward to the next video!
 
Great work by both of you as always. This will be so helpful to so many jeepers out there. Love those tight shots for bolt alignment. (flag nut)
 
You must log in or register to reply here.
Top Bottom