Universal winch plate?

[aermotor]

I have an OR-Fab front stubby which I love, but they have unfortunately closed their doors for good and I can't find their winch plate in stock anywhere for adding it on top of my bumper.

Does anyone know or have experience with something else I might be able to bolt on and use?

 

[WJCO]

Would the Rock Hard 4x4 one work? http://www.rockhard4x4.com/product_p/rh-5010.htm

 

[sipafz]

I have an OR-Fab front stubby which I love, but they have unfortunately closed their doors for good and I can't find their winch plate in stock anywhere for adding it on top of my bumper.

Does anyone know or have experience with something else I might be able to bolt on and use?

Can't you just drill 4 holes and mount it on top or is the metal too thin?

 

[aermotor]

Can't you just drill 4 holes and mount it on top or is the metal too thin?

I'm sure it needs the extra metal for strength/support. It also has a front piece where you would attached a fairlead or something.

I just found a few on eBay and the scumbag wants $1000 :cheesy::cheesy::cheesy:

http://www.ebay.com/itm/Or-Fab-8702...ash=item4b11293ee6:g:knUAAOSw44BYkr4b&vxp=mtr

 

[Rancho]

Ours is a a lot south of $1000 dollars and is considered universal.

It is pre-drilled for popular 12 x 4.5-in. and 9 x 4.5-in. winch bolt patterns.

http://www.gorancho.com/products/rockgear/jeep-jk-rockgear/rockgear-winch-plate-rs6239b.html

 

[notnalc68]

Ours is a a lot south of $1000 dollars and is considered universal.

It is pre-drilled for popular 12 x 4.5-in. and 9 x 4.5-in. winch bolt patterns.

http://www.gorancho.com/products/rockgear/jeep-jk-rockgear/rockgear-winch-plate-rs6239b.html

That looks like it should work, OP.


Sent from my iPhone using WAYALIFE mobile app

 

[sipafz]

I'm sure it needs the extra metal for strength/support. It also has a front piece where you would attached a fairlead or something.

I just found a few on eBay and the scumbag wants $1000 :cheesy::cheesy::cheesy:

http://www.ebay.com/itm/Or-Fab-8702...ash=item4b11293ee6:g:knUAAOSw44BYkr4b&vxp=mtr

View attachment 244052

I over simplified my answer and forgot about the fairlead mounting. Hazard due to occupation I guess. The Rancho or Rock Hard solution should work for you for around $130.

 

[notnalc68]

I over simplified my answer and forgot about the fairlead mounting. Hazard due to occupation I guess. The Rancho or Rock Hard solution should work for you for around $130.

The RockHard would have to be cut on, a little. The Rancho looks like it would be the best choice.


Sent from my iPhone using WAYALIFE mobile app

 

[aermotor]

Ours is a a lot south of $1000 dollars and is considered universal.

It is pre-drilled for popular 12 x 4.5-in. and 9 x 4.5-in. winch bolt patterns.

http://www.gorancho.com/products/rockgear/jeep-jk-rockgear/rockgear-winch-plate-rs6239b.html

This looks pretty good, do you know the product dimensions? Will have to see how it would overlay on the OR-Fab hoop.

 

[Rancho]

Working on this info.
:beer:

This looks pretty good, do you know the product dimensions? Will have to see how it would overlay on the OR-Fab hoop.

 

[Rancho]

OK .25" thick high strength, low alloy steel
It is 8" wide
Between the base plate (where the winch will sit) is 7.5"
The overall length is 32.25"

Let me know if you need more info.
Thanks!
:beer:

This looks pretty good, do you know the product dimensions? Will have to see how it would overlay on the OR-Fab hoop.

 

[aermotor]

OK .25" thick high strength, low alloy steel
It is 8" wide
Between the base plate (where the winch will sit) is 7.5"
The overall length is 32.25"

Let me know if you need more info.
Thanks!
:beer:

Ok thanks, don't happen to have a CAD drawing of it?

 

[Rancho]

Message us

Ok thanks, don't happen to have a CAD drawing of it?