UD 60’s with artec apex trusses

MeanGreenJKU

MeanGreenJKU

Member
Got my UD60’s installed and thought I would share with everyone. These things are huge. I added artec apex trusses to them so I wouldn’t have any spun tubes in the future, especially with the 6.0 LS. I also did the artec adjustable track bar brackets. In the rear i did the 1” stretch coil mount and evo rockstar skids to gain some ground clearance and move the shocks away from the track bar. The ballistic fab cover finished off the rear. For the front welded the psc tabs to the adjustable track bar bracket and tie rod. The E-lockers have worked great hooked up to my switch pros rcr force12. The brakes are massive and stop amazing so far. Went with adams 1350 driveshafts and KMC hex wheels.


D3DE7824-12AA-4A63-A79A-F68F79A1898C.jpeg
EBD176DA-A644-4237-B0FB-29394DB4472E.jpeg

ECD92B1D-E10B-46D7-B0F0-3F9AE962F85C.jpeg
7331A246-00DB-47C5-84FA-2DDCCB7BFD34.jpeg
C61E6E7D-1E00-44AF-8B57-C5BD25022D56.jpeg

F19D2FEE-9129-48A7-ACE2-96492535EB06.jpeg
 
MeanGreenJKU said:
Got my UD60’s installed and thought I would share with everyone. These things are huge. I added artec apex trusses to them so I wouldn’t have any spun tubes in the future, especially with the 6.0 LS. I also did the artec adjustable track bar brackets. In the rear i did the 1” stretch coil mount and evo rockstar skids to gain some ground clearance and move the shocks away from the track bar. The ballistic fab cover finished off the rear. For the front welded the psc tabs to the adjustable track bar bracket and tie rod. The E-lockers have worked great hooked up to my switch pros rcr force12. The brakes are massive and stop amazing so far. Went with adams 1350 driveshafts and KMC hex wheels.


View attachment 365860
View attachment 365861

View attachment 365862
View attachment 365864
View attachment 365865

View attachment 365868
Click to expand...
Awesome, congrats on the new setup! Great looking Jeep
 
LOL... Are those lights mounted on the steering knuckles? That's kinda rad, not sure if practical or useful but rad none the less. I would guess they turn with the wheel and point the direction you are going.

I stared at that picture for 5 minutes wondering what the knobs by the upper ball joint could possible be for, then I realized they are little KC lights
 
CalSgt said:
LOL... Are those lights mounted on the steering knuckles? That's kinda rad, not sure if practical or useful but rad none the less. I would guess they turn with the wheel and point the direction you are going.

I stared at that picture for 5 minutes wondering what the knobs by the upper ball joint could possible be for, then I realized they are little KC lights
Click to expand...
Yes they are. Gatekeeper Offroad makes the mounts for them. They are actually pretty nice. When you are cornering at night the light goes where you are steering which helps a lot. I ended up liking them more than I thought I would lol
 
You must log in or register to reply here.
Top Bottom