Tips for removing these decals

[sipafz]

Peanut butter works good. Smear it on, let it set in the sun and a half hour later, wipe it off.

 

[OverlanderJK]

Peanut butter works good. Smear it on, let it set in the sun and a half hour later, wipe it off.

Do you let the dog lick it off?


Sent from my iPhone using WAYALIFE mobile app

 

[jesse3638]

Peanut butter works good. Smear it on, let it set in the sun and a half hour later, wipe it off.

Do you let the dog lick it off?


Sent from my iPhone using WAYALIFE mobile app

Works to get gum out of hair too.

Sent from my 2PYB2 using WAYALIFE mobile app

 

[jorgelrod]

Thanks for all the tips and the laughs...

 

[jorgelrod]

So, pulled them out and cleaned with Goo gone, rubbing compound, unfortunately on the side that it was peeling, it looks like the adhesive mixed with wax and dirt, nothing has worked. Any ideas before I go the plasma cutter way??

 

[TrainWreck618]

So, pulled them out and cleaned with Goo gone, rubbing compound, unfortunately on the side that it was peeling, it looks like the adhesive mixed with wax and dirt, nothing has worked. Any ideas before I go the plasma cutter way??

Put a Wayalife sticker over it, should fix the problem.


Sent from my iPhone using WAYALIFE mobile app

 

[Stotch]

That one actually should buff out.

 

[WhiteMetal]

Either! And then you get high too. But seriously either and a rag and the glue comes right off


Sent from my iPhone using WAYALIFE mobile app

 

[Zstairlessone]

Plasma cutter.

Flame thrower from 8 feet away for 2-1/2 minutes works pretty well too


Sent from my iPhone using WAYALIFE mobile app

 

[jesse3638]

So, pulled them out and cleaned with Goo gone, rubbing compound, unfortunately on the side that it was peeling, it looks like the adhesive mixed with wax and dirt, nothing has worked. Any ideas before I go the plasma cutter way??

Is it on the paint or paint damage?

Sent from my 2PYB2 using WAYALIFE mobile app

 

[HoosierWolf]

After I removed the factory stickers I used WD40 for the stuck on dirty adhesive and what that didn't take off, I used a towel filled with water and ran it in the microwave to get it really hot. You need some gloves that are heat resistant to handle the really hot towel but it got the rest of the crud off. It worked but it did take a couple of passes.

 

[jorgelrod]

after enough elbow grease it came out, as WJCO I just man'd the fuck up..