highoctane
Caught the Bug
Just going to rattle can it black with some VHT roll bar paint.
Sent from my iPhone using WAYALIFE mobile app
Time for my JK to Evolve - Highoctane Anvil '15 Rubicon Unlimited build
- Thread starter highoctane
- Start date
Just going to rattle can it black with some VHT roll bar paint.
Sent from my iPhone using WAYALIFE mobile app
JKRicky
Member
Looks good!! I'm actually putting in my front upper section tomorrow. The side pillars are a bitch for sure.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
NecessaryEvil
Caught the Bug
Just think, you get to take it all apart and reassemble it painted. Lol worth it. I definitely want to purchase the RH cage.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
highoctane
Caught the Bug
Not looking forward to that! I'm tempted to just run it bare steel for the rest of my month break, and paint it next time I'm home.
Sent from my iPhone using WAYALIFE mobile app
madstiles
New member
LOL! Really? I used rags[/QUOTE]
Women use rags men use towels! XD sorry couldn't resist I'm a Chef that's what I tell the new guys lol
Sent from my SAMSUNG-SM-G935A using WAYALIFE mobile app
highoctane
Caught the Bug
Pretty much done with the front. Just need to trim the a-pillar upper trim panels. 
Moving onto the front overhead bar now.
Sent from my iPhone using WAYALIFE mobile app
Moving onto the front overhead bar now.
Sent from my iPhone using WAYALIFE mobile app
benatc1
Hooked
looks good man! mine is off to the powder coater as speak. the A pillars were a massive pain in the ass but got them eventually
Sent from my SM-G928V using WAYALIFE mobile app
Sent from my SM-G928V using WAYALIFE mobile app
highoctane
Caught the Bug
Almost finished. Had some help from some neighbors getting the hardtop off. After I got the top off I got both the center overhead bars on. Was able to put some shims in the a pillar bars to push them in closer to the dash sides. Started tightening everything up. Only thing left is to tighten the fwd end of the fwd overhead center bar, and the overhead cross bar.
I doubt I'll pull it back out while I'm home to paint it. Will likely wait until this summer when I get the top off again to install a soft top and half doors.
Sent from my iPhone using WAYALIFE mobile app
I doubt I'll pull it back out while I'm home to paint it. Will likely wait until this summer when I get the top off again to install a soft top and half doors.
Sent from my iPhone using WAYALIFE mobile app
highoctane
Caught the Bug
TrainWreck618
Caught the Bug
highoctane
Caught the Bug
Not going to lie, the bare steel cage in an Anvil Jeep looks really good IMHO.
Now onto the c-pillar bars.
Sent from my iPhone using WAYALIFE mobile app
highoctane
Caught the Bug
Benito
Caught the Bug
i think there is such a thing as clear powdercoat!
highoctane
Caught the Bug
Took the kids to Disneyland in Anaheim this week (still here) and swung by Offroad Evolution to pick up misc things. This beast was sitting out back for a photo shoot and is by far my favorite Offroad Evolution project.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
GraniteCrystal
New member
Ooh. I like.
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Build thread: http://wayalife.com/showthread.php?t=32769
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Build thread: http://wayalife.com/showthread.php?t=32769
Mike_JK_Houston_711
New member
Holy shit that Jeep is a beast. I love the front rolling fenders.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app