The Metamorphosis of MumboJumbo

[JKsix]

New from Amazon prime. Just out as a lightning deal. Get it while it lasts.
View attachment 103209


--rccrwlr.

LOLZ for days!

 

[ridg3runner]

New from Amazon prime. Just out as a lightning deal. Get it while it lasts.
View attachment 103209


--rccrwlr.

Figures my wife would like it, lol. Maybe I'll get her one to hang on her trail door, lmao

 

[DA RUNT]

I have that same basket, use it for toiletries in the shower :crazyeyes:

 

[ridg3runner]

I have that same basket, use it for toiletries in the shower :crazyeyes:

That was way too much info there.

 

[DA RUNT]

That was way too much info there.

I could have posted the pic :cheesy:

 

[ridg3runner]

Clutch is ready, I'm ready, Mumbo is ready..Let the stabbing begin!!!

 

[Tigrcky]

Clutch is ready, I'm ready, Mumbo is ready..Let the stabbing begin!!!View attachment 103225View attachment 103226

Shove it in there like a man!!

Sent from my whatchamacallit

 

[bkac]

Shove it in there like a man!!

Sent from my whatchamacallit

Yeah, who needs a Jack! Bench press that bad boy in there. I would say right about now your saying a few nice words trying to line it up.
It normally take me a slew of choice words and a few flying tools then it's in. Just like that! The transmission that is...


Sent from my VS980 4G using WAYALIFE mobile app

 

[ridg3runner]

It's funny when you start working something and suddenly you remember little tricks your old man taught you as a kid, such as using a couple extra long bolts in the bell housing to help align the transmission while stabbing it. BTW, the transmission is in! I'm making progress.

 

[bkac]

That's a great trick. And making sure the tranny is in gear so you can turn the output shaft to help align the input shaft splines to the clutch.

Great job!

Sent from my VS980 4G using WAYALIFE mobile app

 

[Tigrcky]

That's a great trick. And making sure the tranny is in gear so you can turn the output shaft to help align the input shaft splines to the clutch.

Great job!

Sent from my VS980 4G using WAYALIFE mobile app

Lubing the shaft is always a great idea as well

Sent from my whatchamacallit

 

[ridg3runner]

See the problem? Looks to me like the center collar on the pressure plate is too tall and is bottoming out before the pressure plate makes contact with the flywheel.

 

[Tigrcky]

See the problem? Looks to me like the center collar on the pressure plate is too tall and is bottoming out before the pressure plate makes contact with the flywheel. View attachment 103365

Was the clutch disk in the right way?

Sent from my whatchamacallit

 

[ridg3runner]

Was the clutch disk in the right way?

Sent from my whatchamacallit

Yes, and it's even labeled just in case. Input shaft was in the splines, not ON them and clutch fork and TOB looked just the way they should. I'm thinking the new clutch is just too tall.

 

[ridg3runner]

I'm going to call my local parts house right up the street and the next closest about 15 miles away first thing in the morning. If neither have a clutch in stock I'll toss the old one back in for now.

 

[Tigrcky]

Yes, and it's even labeled just in case. Input shaft was in the splines, not ON them and clutch fork and TOB looked just the way they should. I'm thinking the new clutch is just too tall.

Quite possible, I'd say wait till am then get replacement and have old to compare

Sent from my whatchamacallit

 

[ridg3runner]

On a good note, I had it torn back down in about 3 hrs, lol.

 

[Tigrcky]

On a good note, I had it torn back down in about 3 hrs, lol.

One always goes faster after the first time

Sent from my whatchamacallit

 

[Panda]

On a good note, I had it torn back down in about 3 hrs, lol.

:clap2: :thumb: way to go my friend!

 

[DA RUNT]

Mumbo Jumbo Shirts available here :crazyeyes: