The build of Clifford's tire carrier...

Clifford33 said:
Where did you mount the lights for your rock lights? Iv been wanting to get some for rock lights.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

I made 8 mounting brackets and used the EVO mini-liners for one light each side. I have 5 lights on each side and previously used the extra two lights as aux reverse lights mounted in the rear fascia.

So two lights per wheel well and one waist light mounted on the back side of the body mount between the doors.

This should be the post, but I didn't really take pics of where I mounted each one. I can do that if it will help. Let me know.

http://wayalife.com/showthread.php?...-Super-Stocker-quot-build&p=801043#post801043
 
USMC Wrangler said:
I made 8 mounting brackets and used the EVO mini-liners for one light each side. I have 5 lights on each side and previously used the extra two lights as aux reverse lights mounted in the rear fascia.

So two lights per wheel well and one waist light mounted on the back side of the body mount between the doors.

This should be the post, but I didn't really take pics of where I mounted each one. I can do that if it will help. Let me know.

http://wayalife.com/showthread.php?...-Super-Stocker-quot-build&p=801043#post801043
Click to expand...

Nice jeep I just checked out your page. Yeah I really like how you did it looks like a lot of light on the ground I'm definitely going to do that now thanks. Hey I have the same welding table aha.


Sent from my iPhone using WAYALIFE mobile app
 
Clifford33 said:
Nice jeep I just checked out your page. Yeah I really like how you did it looks like a lot of light on the ground I'm definitely going to do that now thanks. Hey I have the same welding table aha.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Thank you! I haven't done a night trip or been stuck on a trail after dark, but I'm pleased with the light spread. Let me know if you have questions when you get to it.

Those tables do the trick! Looking forward to seeing more of your tire carrier! Hoping to make one soon and maybe a few other things. It's great therapy to me.
 
This is super nitpicking but can you line up the license plate with the spokes of the wheels? Right now it's just a little off.

Looks good though man. That's just a small thing.
 
I just did 2 more guitars too. One I put a Floyd rose bridge into a strat and installed a fuzz factor pedal inside of the guitar and the other strat I just redid the finish.


Sent from my iPhone using WAYALIFE mobile app
 
IMG_3476.jpg
Well here it is guys the one piece Iv been waiting for to get this project completed.
IMG_3480.jpg you can see the pvc pipe behind the tire I'm using it to measure before i cut my stinger. It's all measured and cut now just need to notch the tubes.
IMG_3477.jpg
About how high it will sit. Also will be a little closer to the body. The tire will lay at the same angle as the hard top so it will have a slight tilt.
IMG_3478.jpgfinal height
IMG_3479.jpg


Sent from my iPhone using WAYALIFE mobile app
 
Clifford33 said:
View attachment 240823
Well here it is guys the one piece Iv been waiting for to get this project completed.
View attachment 240824 you can see the pvc pipe behind the tire I'm using it to measure before i cut my stinger. It's all measured and cut now just need to notch the tubes.
View attachment 240825
About how high it will sit. Also will be a little closer to the body. The tire will lay at the same angle as the hard top so it will have a slight tilt.
View attachment 240826final height
View attachment 240827


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Nice! [emoji106] I know how good it must feel to start getting on the downhill slide!
 
You must log in or register to reply here.
Top Bottom