Sporadic's "Cool Hand Luke" Build Thread

[Sporadic]

Good Looking Jeep! your build is coming along nicely!

Much appreciated cozdude!

 

[MR.Ty]

Your build is sweet and I like what you have done with the third brake light. Im going to have to see if it works with 17s

 

[Sporadic]

Your build is sweet and I like what you have done with the third brake light. Im going to have to see if it works with 17s

Thanks Mr. Ty!...from another "Ty". It's a super easy mod and free to boot.

 

[Sporadic]

This past February I installed the EVO rear Fascia. Not an easy install but love the look, even without the frame trimmed.

 

[Sporadic]

Thanks to 10frank9 and the write-up he posted, I performed a garage door opener mod on my rig. Another simple mod with almost no cost. Apologies in advance for the poor quality pics.

 

[HILLZ]

Time to chop those flares. :cheesy:

 

[spicoli]

View attachment 112055

I've been thinking of getting those rugged ridge mirrors for summer. What do you think of them?

 

[Sporadic]

I've been thinking of getting those rugged ridge mirrors for summer. What do you think of them?

They work well spicoli but they do vibrate a bit.

 

[Sporadic]

Time to chop those flares. :cheesy:

Really been thinking about doing that HILLZ but I'm not quite ready to pull the trigger. How much wind flap do you get at highway speeds?

 

[Sporadic]

Trimmed the pinch seems a while back...






A little JB Weld

 

[HILLZ]

Really been thinking about doing that HILLZ but I'm not quite ready to pull the trigger. How much wind flap do you get at highway speeds?

As i'm running a full width bumper i went a slightly different route then most with my chop, i don't get any flapping.

 

[Sporadic]

As i'm running a full width bumper i went a slightly different route then most with my chop, i don't get any flapping.

So, you trimmed the outer edge...that's a nice look HILLZ. Nice looking rig too.

 

[Sporadic]

After adding the 1/4 pounder bumper and stinger I noticed a little more rake out front. As I plan ahead for a winch I wanted to get rid of the rake so I installed a set of Daystar 3/4" coil spacers. This was the first time doing any sort of suspension work. ...used Eddie's budget boost write-up and all went well. I must say that's It's very gratifying to do the work myself.

 

[thardy]

Did you add front and rear or just the front spacers?

 

[Sporadic]

Did you add front and rear or just the front spacers?

Only added spacers to the front.

 

[Sporadic]

Was originally planning on the Warn Powerplant but ran across a deal on a gently used 9.5 cti-s that I couldn't turn down. Once the EVO vacuum pump relocation kit and hawse fairlead arrive tomorrow I can hook everything up.

 

[jmsuitter]

View attachment 112036

View attachment 112037

View attachment 112038

View attachment 112039

This wheels look great love the inserts did you order them custom paint already or do it yourself?

 

[Sporadic]

This wheels look great love the inserts did you order them custom paint already or do it yourself?

Thanks jmsuitter. I had a local shop paint the inserts but in retrospect I think a Mopar rattle can would have done a fine job.

 

[Sporadic]

That's just outright gorgeous!

 

[Sporadic]

EVO Vacuum pump relocation kit installed. Quality product!