Rear corners ???

jeek.olllllllo said:
Do they still make the skins like that? I love the look!
Click to expand...

Jerms said:
Thanks for those pics. Are the outlaws still available?

Sent from my PC36100 using WAYALIFE mobile app
Click to expand...

OverlanderJK said:
Pretty sure the builder flares are no longer produced or are special order production. Those are just the corner skins.
Click to expand...

The builder flares are not a regular production item, they are considered a custom item. You need to contact EVO mfg about their availability. I just so happen to know a guy, who's 3rd cousin knows some chic, that knew some body in Fullerton, CA. that got me in touch with some dude who was able to get me my set......


image-3595238056.jpg




image-4140119986.jpg
 
GCM 2 said:
The builder flares are not a regular production item, they are considered a custom item. You need to contact EVO mfg about their availability. I just so happen to know a guy, who's 3rd cousin knows some chic, that knew some body in Fullerton, CA. that got me in touch with some dude who was able to get me my set......


View attachment 54368




View attachment 54369
Click to expand...

Sounds like a pretty cool dude:D Great pic of your Jeep.

2011 JKU 3.5 R.E. Longarm lift.
 
GCM 2 said:
The builder flares are not a regular production item, they are considered a custom item. You need to contact EVO mfg about their availability. I just so happen to know a guy, who's 3rd cousin knows some chic, that knew some body in Fullerton, CA. that got me in touch with some dude who was able to get me my set......

<img src="http://wayalife.com/attachment.php?attachmentid=54368"/>

<img src="http://wayalife.com/attachment.php?attachmentid=54369"/>
Click to expand...

Dam:/ I gotta get in touched with my cousins lol
 
The builder corners like on Greg's jeep are usually in stock. (Plain, no fender or lower tube)

When you decide to add the flare the build time is extended at Evo mfg as it's not item that goes into production on a regular basis. The tube on the lower is only available if installed at Off-road evolution
 
Chris@OffroadEvolution said:
The builder corners like on Greg's jeep are usually in stock. (Plain, no fender or lower tube)

When you decide to add the flare the build time is extended at Evo mfg as it's not item that goes into production on a regular basis. The tube on the lower is only available if installed at Off-road evolution
Click to expand...

Is there a 2 door version of the builder corners available ?
 
the corner/flare combo would be considered a "custom fabrication" job and as Chris mentioned, would only available at ORE. as for the 2dr corners, the standard EVO 4dr and 2dr corners are the same.
 
drew@offroadevolution said:
the corner/flare combo would be considered a "custom fabrication" job and as Chris mentioned, would only available at ORE. as for the 2dr corners, the standard EVO 4dr and 2dr corners are the same.
Click to expand...

Hey Drew, it's jeremy over in virginia, the guy you been talking to about the sway bar links and I had ordered the slabs last week. I'm the OP here and would love for you to pm me an estimate on the fenders gcm2 is running with the tubes on the bottom just like in his pics. If you prefer me to call, just let me know
 
GCM 2 said:
The builder flares are not a regular production item, they are considered a custom item. You need to contact EVO mfg about their availability. I just so happen to know a guy, who's 3rd cousin knows some chic, that knew some body in Fullerton, CA. that got me in touch with some dude who was able to get me my set......


View attachment 54368




View attachment 54369
Click to expand...

Could you tell me how much lift you are running? Also, I'd love to hear some feedback, pros and cons on running these corners without flares with the exception of being illegal ;). And if you have more pics of your jeep, could you post them? Your jeep, well, just might be my inspiration :brows:
 
Jerms said:
Could you tell me how much lift you are running? Also, I'd love to hear some feedback, pros and cons on running these corners without flares with the exception of being illegal ;). And if you have more pics of your jeep, could you post them? Your jeep, well, just might be my inspiration :brows:
Click to expand...

Jerms, you can actually see his jeep in action on the last two JKX's, Keep it Tight and the heartland. They are on the WAYALIFE YouTube channel. Also check out the thread Soap(not TV).
 
Jerms said:
Hey Drew, it's jeremy over in virginia, the guy you been talking to about the sway bar links and I had ordered the slabs last week. I'm the OP here and would love for you to pm me an estimate on the fenders gcm2 is running with the tubes on the bottom just like in his pics. If you prefer me to call, just let me know
Click to expand...


Jerms, here is the catch with the builder flares I'm running.....the cool little tubing added to the bottom is only available if the install is done at Off Road Evolution (I think? Drew/Chris please confirm). At least when I bought mine, I was told by Mel or Lisa at the shop that the tubing is added AFTER the corners are initially fitted, just before final install of the corners. I think if you buy the builder flares and have them shipped to you, they will come without tubing. You can see my flares are completely fitted, but have no tubing added yet.

image-3275756097.jpg


Jerms said:
Could you tell me how much lift you are running? Also, I'd love to hear some feedback, pros and cons on running these corners without flares with the exception of being illegal ;). And if you have more pics of your jeep, could you post them? Your jeep, well, just might be my inspiration :brows:
Click to expand...

Currently my coilovers are dialed in to run about the equivalent of a 4" traditional coil spring lift.

Pros- looks badass, great protection from damage, little to no maintainence, nothing to get ripped off in tight spots, since it covers so much surface area (unlike bolt on flat metal tube fenders) in the event of a strike or rollover it will disperse energy throughout the quarter panel since it is now really the entire new quarter panel.

Cons- no flare could be illegal in your state, adds a bunch of weight, lack of flare really not advisable unless you live in the southwest where it never rains or has mud because your jeep will see major tire slinging ugliness

The corners saved my jeep from any serious damage after this flop



image-1329944133.jpg




image-3795449800.jpg




image-3690369794.jpg






JKbrick said:
Does EVO still sell donuts too?
View attachment 54403
Click to expand...

Yes, but only buy them when the red flashing light is on......that's when they are hot and fresh!
 
Jerms said:
Hey Drew, it's jeremy over in virginia, the guy you been talking to about the sway bar links and I had ordered the slabs last week. I'm the OP here and would love for you to pm me an estimate on the fenders gcm2 is running with the tubes on the bottom just like in his pics. If you prefer me to call, just let me know
Click to expand...

As stated earlier that bar on the bottom can only be installed at ORE. It can't be done unless its on your rig.
 
GCM 2 said:
Jerms, here is the catch with the builder flares I'm running.....the cool little tubing added to the bottom is only available if the install is done at Off Road Evolution (I think? Drew/Chris please confirm). At least when I bought mine, I was told by Mel or Lisa at the shop that the tubing is added AFTER the corners are initially fitted, just before final install of the corners. I think if you buy the builder flares and have them shipped to you, they will come without tubing. You can see my flares are completely fitted, but have no tubing added yet.

View attachment 54404
Click to expand...
 
You must log in or register to reply here.
Top Bottom