ProRock 80's Build

[Krawlin]

Axles are done!! :rock:

 

[cozdude]

oh no shit! i say northridge post these on facebook last night! completly forgot you were geting a front pr80 :rock:

 

[Krawlin]

Cage and rear bumper back from powdercoat. One the axles are here I'll have everything but the driveshafts.
Going with 1410's just have to measure them before ordering them.

 

[PNWjeeper]

Axles are done!! :rock:

those are monsters.

 

[Krawlin]

Sorry for the delays, the Jeep is pretty much done. Just waiting for some warm weather so I can put some miles on it.
Here are some pictures from the last month or so.

 

[Krawlin]

 

[Tigrcky]

damn its looking good! :thumb:

 

[Krawlin]

 

[Mdrnizd]

What do you do if you have a flat, since you don't run a spare?

 

[Krawlin]

The spare is inside the Jeep for now

 

[StrizzyChris]

I was under the understanding that the EVO hydro skid was an in house only item :thinking:

 

[deagonkennels]

I was under the understanding that the EVO hydro skid was an in house only item :thinking:

No, I have the skid on mine too.

 

[deagonkennels]

Nice looking rig! Thanks for all the pictures.

 

[Krawlin]

Thanks!

The Hydro Skid is part of Evo's high steer kit. Come with the skid, drag link and tie rod.

 

[72blubyu]

Real nice rig

 

[StrizzyChris]

No, I have the skid on mine too.

The Hydro Skid is part of Evo's high steer kit. Come with the skid, drag link and tie rod.

I knew I wasn't crazy, and pulling this outta my arse, in my thought of it being an in house item...at least at one point

Below are quotes from a few other threads reguarding Dynatrac D60's and the EVO skid and high steer kit

So I called Off Road Evolution and spoke to Jake and he said no way to get that kit(skid system) outside of them doing it.

According to another thread a few months later, the skid can be had IF you order the axle and high steer c hydro skid system through ORE or EVO

Ok boys, here's the rub. I called ORE today about Greg's badass EVO skid for his PSC hydro assist ram:
It is only for D60 axles, they don't make one for D44 sized housings.
If you order a D60 from them, you can purchase the skid, even if you are having it shipped to you.
If you don't get it installed at ORE, your local shop (or yourself if you're a welder) will need to install it AFTER the ram is installed, not before.

So apparently if I want that skid I'll have to go big or go home with D60's!!! Haha.

Is it safe to assume that you both ordered the axles through ORE or EVO?

 

[Tigrcky]

I knew I wasn't crazy, and pulling this outta my arse, in my thought of it being an in house item...at least at one point

Below are quotes from a few other threads reguarding Dynatrac D60's and the EVO skid and high steer kit



According to another thread a few months later, the skid can be had IF you order the axle and high steer c hydro skid system through ORE or EVO



Is it safe to assume that you both ordered the axles through ORE or EVO?

if im not mistaken he got the axles through northridge

 

[Krawlin]

Yeah, I ordered everything through Northridge.

 

[Krawlin]

Nice looking rig! Thanks for all the pictures.

Thanks! Yours doesn't look to bad either!
:rock:

 

[LAJK]

Thanks!

The Hydro Skid is part of Evo's high steer kit. Come with the skid, drag link and tie rod.

How much does this high steer kit cost?