Buster3479
Member
My 60/60 Hardcore package arrived this week and I'm bolting the front on this morning. These axles are industrial works of art, and my wife and I can't wait to get them on a trail. I went against the grain and ordered mine 5x5.5 to fit wheels we love, and with ARB and 5.13 for 37's. Obligatory shiny picture below.
I have a few questions that aren't Dynatrac specific, though please move this post to that sub-forum if a mod thinks it fit's there best.
1. Passenger side wheel speed sensor - Which*way is the*wheel speed*sensor supposed to face, mounting hole toward front or rear of Jeep?* If I mount it in the way I'd expect (with the little holes in the sensor facing the tone ring and the mounting hole facing rear), the wire exits outboard and rubs against the brake rotor.* If I flip it around the other way as pictured with the mounting hole toward the front of the Jeep, it clears the rotor but I don't know if the sensor will function that way.* Do I need a driver's side specific wheel speed sensor?*
2. Wheel speed sensor wire routing - after mounting in the tone ring adapters,*how are the wires normally routed?* Up and over the steering arm, or tucked through somewhere?
3. Brake lines -* Do people normally route these in front or rear of the shock shaft?* If I route it in front, it follows the ABS wire and can be zip-tied to the spring.
See attached pictures for better reference.
Thank you!
I have a few questions that aren't Dynatrac specific, though please move this post to that sub-forum if a mod thinks it fit's there best.
1. Passenger side wheel speed sensor - Which*way is the*wheel speed*sensor supposed to face, mounting hole toward front or rear of Jeep?* If I mount it in the way I'd expect (with the little holes in the sensor facing the tone ring and the mounting hole facing rear), the wire exits outboard and rubs against the brake rotor.* If I flip it around the other way as pictured with the mounting hole toward the front of the Jeep, it clears the rotor but I don't know if the sensor will function that way.* Do I need a driver's side specific wheel speed sensor?*
2. Wheel speed sensor wire routing - after mounting in the tone ring adapters,*how are the wires normally routed?* Up and over the steering arm, or tucked through somewhere?
3. Brake lines -* Do people normally route these in front or rear of the shock shaft?* If I route it in front, it follows the ABS wire and can be zip-tied to the spring.
See attached pictures for better reference.
Thank you!
Attachments
Last edited: