PREVIEW : EVO'd Up WAYALIFE Jeep JT Gladiator - SEMA 2022
- Thread starter wayoflife
- Start date
Yes, this is a Gladiator specific setup.
LOL - I think something a little bigger under the hood first will be necessary for that.
benatc1
Hooked
Now we’re talking!!
Dale72
Hooked
Bet you wish you still had your JT
Dale72
Hooked
Well just more money that I will be putting into my JT in the future. LOLI think a few of you might be interested in seeing these pics as well. This first one is of a factory Jeep Gladiator rear drive shaft at a full droop. As you'll notice, the pinion drops substantially due to the factory control arm geometry.
On a u-joint style drive shaft, this would cause quite a bit of bind and when running a tall lift, it can be difficult to address driveline vibrations.
That said, this is what we now see with our new EVO trailing arms. Perfect alignment of drive shaft and pinion and from full bump to full droop.
Best part of all this is... you do NOT have to install trailing arms to make this possible. EVO will be making this triangulated 4-link setup available for their existing coilover kit and even standard coils and shocks setup. The only thing you will need to do is have one of their fuel tanks installed.
Jsouder53
Hooked
I was about to ask this lol any hint of what is in store?
Dale72
Hooked
The rear axle has a truss on itSince nobody seemed to have noticed, there is one other mod that can be seen on our Gladiator...
benatc1
Hooked
Ha! If I know EVO they’ll keep coming out with cool stuff for the JL too
Dale72
Hooked
I hear ya. Sometimes I still wish I had my JLUR
kevman65
Hooked
I saw the bigger gas tank, but didn't say anything. I don't know that I like it's location and how low it hangs.Since nobody seemed to have noticed, there is one other mod that can be seen on our Gladiator...
OverlanderJK
Resident Smartass
It’s probably the perfect location. Will help keep that light ass rear end level when full of fuel.
Been talking to Motech
LOL - the rear bumper is new. Now has a hitch receiver and ports for the sensors.
Actually, I think it only looks low because of the high-n-tight bumper and trimmed bed sides. And yes, I’m thinking the weight back there will be a help.
Dale72
Hooked
My new one doesn't have the rear sensors. Hell it doesn't have the hitch receiver either
Brute
Hooked
Having the fuel below the bed is great for cog…it really helps offset weight on top of a rack…
Your truck is looking great…I’d ditch the bed storage, mount the tire angled in the bed…remove the tailgate…