Pics of your EVO tire carriers please!

[seanb33]

Cheap if I remember correctly. Like $10. Their website doesn't say exactly

http://www.vectoroffroad.com/ufos-rear-p-56.html


Sent from my iPhone

I'll check them out. Thanks!

 

[seanb33]

Just get the daystar bump stops. You can cut them to the desired length.

Will do. So are they needed for the evo carrier or just to fill the tailgate holes?

 

[JKJody]

Alright, just dropped everything off at the powder coater to be blasted and coated. Should have it all back in a day or so and i can finally install this thing.

 

[seanb33]

Alright, just dropped everything off at the powder coater to be blasted and coated. Should have it all back in a day or so and i can finally install this thing.

Lucky you! Can't wait to see it, I just ordered mine today

 

[JKFlyer]

Sean
Rubber stopper things don't get in way

I am using oro lite dot LEDs and the matching license plate bracket...mounted to my bumper...spliced in to hitch wiring

Heres a pic...shows rear dually too



Sent from my DROID RAZR HD using WAYALIFE mobile app

 

[PNWjeeper]

Seeing all these pics makes it hard not to buy this carrier... Just can't being myself to drill holes in the Jeep yet to mount skins.

 

[seanb33]

Seeing all these pics makes it hard not to buy this carrier... Just can't being myself to drill holes in the Jeep yet to mount skins.

Get the skins installed by a shop. Drilling 20+ holes in my jeep scares me too, good thing I live 10 minutes from ORE

 

[JKJody]

Everything is back from powdercoat. The finish is perfect. Now i need the jeep back.

 

[seanb33]

View attachment 67649View attachment 67650
Everything is back from powdercoat. The finish is perfect. Now i need the jeep back.

Looking good! What finish did you choose?

 

[Oscar35]

Ok, so rivet tool, C-clamps and drill should be the main tools needed to install the EVO tire carrier right?

Sent from my SGH-M919 using WAYALIFE mobile app

 

[pvanweelden]

Oscar- take a moment or two and check out MTG's build thread, he has good info there on installing the skins and tire carrier

http://wayalife.com/showthread.php?1585-The-building-of-knuckles/page41

 

[Oscar35]

Will do Thx.

Sent from my SGH-M919 using WAYALIFE mobile app

 

[JKJody]

Looking good! What finish did you choose?

Low gloss textured black

 

[crippledpetey]

Ok, so rivet tool, C-clamps and drill should be the main tools needed to install the EVO tire carrier right?

Sent from my SGH-M919 using WAYALIFE mobile app

If you need a good nutsert tool let me know. I sprung for a nice one after messing up a few holes with crappy ones.

 

[Atch]

Ok, so rivet tool, C-clamps and drill should be the main tools needed to install the EVO tire carrier right?

Sent from my SGH-M919 using WAYALIFE mobile app

Here is a very popular rivnut tool http://www.amazon.com/Astro-Pneumat...d=1391560154&sr=8-12&keywords=astro+pneumatic I have it and would highly recommend it. Running a ratchet strap to the tailgate works great for mounting the skins.

 

[Oscar35]

I just ordered the Marson Rivet tool. I did some research on rivet tools and I liked what I read. Thx fellas for your input. Wish me luck. :thumbup:

Sent from my SGH-M919 using WAYALIFE mobile app

 

[JKFlyer]

I just ordered the Marson Rivet tool. I did some research on rivet tools and I liked what I read. Thx fellas for your input. Wish me luck. :thumbup:

Sent from my SGH-M919 using WAYALIFE mobile app

The clamping us tough part. Use ratchet tie straps to get corners snug against jeep

Good luck

Sent from my DROID RAZR HD using WAYALIFE mobile app

 

[Oscar35]

Will do Jk flyer. Thx for the tip.

Sent from my SGH-M919 using WAYALIFE mobile app

 

[JKJody]

Finally installed.

 

[JKFlyer]

Congrats!!!!!

Sent from my DROID RAZR HD using WAYALIFE mobile app