Pics of your EVO tire carriers please!

JKJody said:
I also ordered some of these: View attachment 62153
They were only $9 a piece from ebay. Not bad considering these are usually $50 a piece.
Click to expand...

I honestly think these are gonna be tough to use. You need something to grab on to to pull pins up. There is some slight friction

Sent from my DROID RAZR HD using WAYALIFE mobile app
 
JKFlyer said:
I honestly think these are gonna be tough to use. You need something to grab on to to pull pins up. There is some slight friction

Sent from my DROID RAZR HD using WAYALIFE mobile app
Click to expand...

My friend has the same ones. I was playing with them. Not to bad. The low profile is what i like about them.
 
JKFlyer said:
Agreed...just remember u may need skins (Jody already had) and u need street legal lights as evo ones don't have backup. I oro lite dots (c earlier posts). I came out to 1640 for everything with north ridge
Click to expand...

Ok, yeah I notice the legal diff. Thx for the sugestion.




Sent from my iPad using WAYALIFE mobile app
 
Does anyone w evo carrier get rust on their joints? Right where I put pin through on driver side joints there is lots of rust. Only 3 weeks old but outside in rain alot. Normal?

Sent from my DROID RAZR HD using WAYALIFE mobile app
 

Attachments

  • 1389559652446.jpg
    1389559652446.jpg
    73.5 KB · Views: 567
JKFlyer said:
Does anyone w evo carrier get rust on their joints? Right where I put pin through on driver side joints there is lots of rust. Only 3 weeks old but outside in rain alot. Normal?

Sent from my DROID RAZR HD using WAYALIFE mobile app
Click to expand...

Oh wow I'm getting mine installed this week I would say spray some galvinize for rust
 
JKFlyer said:
Does anyone w evo carrier get rust on their joints? Right where I put pin through on driver side joints there is lots of rust. Only 3 weeks old but outside in rain alot. Normal? Sent from my DROID RAZR HD using WAYALIFE mobile app
Click to expand...

Put some grease in the joint.
 
JKFlyer said:
Does anyone w evo carrier get rust on their joints? Right where I put pin through on driver side joints there is lots of rust. Only 3 weeks old but outside in rain alot. Normal?

Sent from my DROID RAZR HD using WAYALIFE mobile app
Click to expand...

I greased mine right away because of the noise so not sure if that helped at all. I have rust but not like that :thinking:
 
So I talked to engineer at Evo, ORE, and Currie who makes Jonny joints. All said they never really see it. But Currie said they almost always go on sideways....rare they are vertical so the water sitting in there issurely the issue. Anyway, should be no structural issues with joint....I greased joints more...but don't do too much or it messes up alignment, I took a wire brush to clean off Rust and they said to spray some wd40. I'll keep a close eye on it

Sent from my DROID RAZR HD using WAYALIFE mobile app
 
Last edited:
JKFlyer said:
So I talked to engineer at Evo, ORE, and Currie who makes Jonny joints. All said they never really see it. But Currie said they almost always go on sideways....rare they are vertical so the water sitting in there issurely the issue. Anyway, should be no structural issues with joint....I greased joints more...but don't do too much or it messes up alignment, I took a wire brush to clean off Rust and they said to spray some wd40. I'll keep a close eye on it

Sent from my DROID RAZR HD using WAYALIFE mobile app
Click to expand...

I might get some fluid film to spray on them. We use it at John Deere on our products we ship overseas to prevent rust.
 
Forgive the question but what us fluid film and where do U get it?

Thanks Atch

Sent from my DROID RAZR HD using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom