TrailHunter
Hooked
First Run with the new EVO Lift.. couldn’t be happier. MJT:
Orion
- Thread starter TrailHunter
- Start date
TrailHunter
Hooked
Felt like I was driving on Pillows. [emoji1417]
BaddestCross
Active Member
We'll start giving you shit now about 37s so your kid can install them for you for his graduation present. [emoji23]
Looks good brother. Glad you were able to get out there and test it out. [emoji482]
--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
rubiDave
Active Member
TrailHunter
Hooked
I wouldn’t expect anything less. Lol. Thanks!
Thanks Dave. Now we can show those 37” posers how it’s done. (At least until we get 37’s) [emoji51]
wjtstudios
Hooked
Jeeps looks great, nice pictures too!
2015 JKUR AEV JK350
1985 Jeep Scrambler
2015 JKUR AEV JK350
1985 Jeep Scrambler
TrailHunter
Hooked
After replacing the Drag link joint at the Pitman and a installing a Synergy Track Bar... I realized my Lower Ball Joints were hammered and causing my Death Wobble... Pro Steers & Stabilizer are completed:
Synergy Adjustable Track bar:
Dynatrac ProSteers:
Testing on some Fire Roads... everything feels tight again:
Welded on tabs to level out the new Stabilizer and also burned the EVO bracket in a few spots:
Stabilizer sits more level now:
Things are finally Dialed in.
Synergy Adjustable Track bar:
Dynatrac ProSteers:
Testing on some Fire Roads... everything feels tight again:
Welded on tabs to level out the new Stabilizer and also burned the EVO bracket in a few spots:
Stabilizer sits more level now:
Things are finally Dialed in.
HighwayTrout
Hooked
Sweet!
Want to come do mine?
[emoji23]
Want to come do mine?
[emoji23]
wjtstudios
Hooked
Congrats!
2015 JKUR AEV JK350
1985 Jeep Scrambler
2015 JKUR AEV JK350
1985 Jeep Scrambler
VeruGE*144
Caught the Bug
Looks great. Ball joints are kind of fun, you get to beat the shit out of your Jeep with bfh. I need to burn my bracket in. Sick of torquing that summbitch.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
TrailHunter
Hooked
Sure! Or I could drink your whiskey and supervise.... lol
Thanks! Ball Joints actually went smoother than I expected. I didn’t go crazy with the welds.. hopefully enough just to keep it in place. [emoji481]
HighwayTrout
Hooked
That works too. lol
black pearl
Hooked
Looking good!
It’s nice have things nice and tight in the under carriage
Sent from my iPhone using WAYALIFE mobile app
It’s nice have things nice and tight in the under carriage
Sent from my iPhone using WAYALIFE mobile app
TrailHunter
Hooked
Thanks!
Looking good!
It’s nice have things nice and tight in the under carriage
Sent from my iPhone using WAYALIFE mobile app
We all know that is Temporary and won't last long at all. :crazyeyes:
RCVRY
New member
rubiDave
Active Member
TrailHunter
Hooked
Just as I was afraid of, the puncture and Dent in my Gas tank skid was pushing sharp metal up against the plastic tank... Fortunately there was only surface damage and I was able to bend things out without removing the whole tank:
After removing some bolts and prying the skid down... this was rubbing against the tank. Not good.
First I cut the bulge off with a sawzall.
Using a jack, leverage blocks, and a crow bar... I was able to push things out and distance the skid from the tank.
A large crescent worked perfect to reshape the edge I had flattened out.
I’m sure it will bend back next time I hit a rock there... but at least there is no sharp metal to puncture the tank.
After removing some bolts and prying the skid down... this was rubbing against the tank. Not good.
First I cut the bulge off with a sawzall.
Using a jack, leverage blocks, and a crow bar... I was able to push things out and distance the skid from the tank.
A large crescent worked perfect to reshape the edge I had flattened out.
I’m sure it will bend back next time I hit a rock there... but at least there is no sharp metal to puncture the tank.