New Genright Cage Coming!

GCM 2 said:
I think so, obstruction or something. Think about it, you don't see any vehicle anymore with split windows (old VW buses, big rigs, buses, motor homes). It my have been some code written in over the years to phase that type of construction out. Hell, I really don't know, maybe I will look into it a little deeper instead of just guessing:icon_crazy:
Click to expand...

That would be my guess.

Bummed I'm going to miss SEMA this year and can't check it out in person. Hopefully "somebody" takes a lot of high res pictures. ;)
 
I suspect you could just leave the "V" out if it blocked the drivers vision or was illegal. 2 less tubes to be fit and welded.

Sharkey said:
The center "V" down the windshield wouldn't work for me on a DD.
Click to expand...

GCM 2 said:
I talked with ORE (Mel) about the center windshield "V" bars, pretty much an illegal add on for on-road use. Not sure that I care, I would run it until Johnny Law cited me or it.
Click to expand...

MTG said:
What is illegal? The reduction of visibility?
Click to expand...

GCM 2 said:
I think so, obstruction or something. Think about it, you don't see any vehicle anymore with split windows (old VW buses, big rigs, buses, motor homes). It my have been some code written in over the years to phase that type of construction out. Hell, I really don't know, maybe I will look into it a little deeper instead of just guessing:icon_crazy:
Click to expand...

paychex.308 said:
i think that even something hanging from your rear view mirror is "citable".... so ya that sounds about rite...


andrew-
Click to expand...
 
LoPo said:
I suspect you could just leave the "V" out if it blocked the drivers vision or was illegal. 2 less tubes to be fit and welded.
Click to expand...

GCM 2 said:
I think so, obstruction or something. Think about it, you don't see any vehicle anymore with split windows (old VW buses, big rigs, buses, motor homes). It my have been some code written in over the years to phase that type of construction out. Hell, I really don't know, maybe I will look into it a little deeper instead of just guessing:icon_crazy:
Click to expand...

Do you guys thoink it's possible that the "v" is just tacked in to add reinforcement before it is all welded up? I ask, because there also appears to be a bar that start between the passenger side doors and the appears to tun to the top corner of the drivers side windshield. That would basically have to run through the driver...
 
mikefishes said:
Do you guys thoink it's possible that the "v" is just tacked in to add reinforcement before it is all welded up? I ask, because there also appears to be a bar that start between the passenger side doors and the appears to tun to the top corner of the drivers side windshield. That would basically have to run through the driver...
Click to expand...

That's an optical illusion. What you are describing is two different bars. One goes from the floor of the b-pillar up to the harness bar. The other comes up from the driver's footwell to tie in to driver's a-pillar area.

As for the "v", it's common on most off-road only cages so I don't think it's just tacked in there.
 
Sharkey said:
That's an optical illusion. What you are describing is two different bars. One goes from the floor of the b-pillar up to the harness bar. The other comes up from the driver's footwell to tie in to driver's a-pillar area.

As for the "v", it's common on most off-road only cages so I don't think it's just tacked in there.
Click to expand...

Yeah, I see my confusion about the second bar now. I was looking on my phone and the photo was way too small. Thanks
 
Don't forget the disclaimer posted along with the pic of the cage.

(Pictured is the protoype, production cage may change)

I doubt the production cage will be this hardcore out of the box. Doesn't mean you can't add your own twists to it though. :beer:
 
Here's some pics of the cage that I was sent.

1381094224404.jpg
1381094249978.jpg

You can see where it hooks into their forthcoming outboard Coilover towers
1381094296684.jpg

B Pillar mount.
1381094341183.jpg

Unfinished front
1381094377144.jpg


Sent from my Galaxy Nexus using WAYALIFE mobile app
 
that was a nice looking cage. checked it out yesterday. there are gonna be a lot of changes though to the actual production unit. talking to the rep, it seems like you better just wait to see the finished production unit. basically the only thing that will be the same is that its steel tubing:cheesy:
 
So you have to completely abandon your OEM dash? Wow, that should fly right off the shelves. :nah:
 
Sharkey said:
So you have to completely abandon your OEM dash? Wow, that should fly right off the shelves. :nah:
Click to expand...

Nope. They are still working fitment with the OEM dash. This rig just happened to have a new one built.
 
You must log in or register to reply here.
Top Bottom