Name That Tool

[Aceisback]

Nope.

The ”Stick” part is common to be wood, aluminum… or even carbon fiber. The ball at the end is usually leather… or even an old rag would work.

Well then we’ll just call it a joust.

 

[duktrx]

Mahl stick? Used by painters.

 

[TrailHunter]

Mahl stick? Used by painters.

Bingo!!! Used by Painters, Sign Letterers and Pinstripers.

 

[duktrx]

 

[kevman65]

Never seen a shiny one, but looks like an iron worker drift/alignment tool.

 

[TrailHunter]

View attachment 391221

cooking Temp probe

 

[duktrx]

cooking Temp probe

Yep, a wireless temp probe.
@TrailHunter your up.

 

[Spazbyt]

For real I don't know what this is.

 

[Ddays]

For real I don't know what this is.
View attachment 392159

Battery terminal cleaner. That part sticking out goes on the inside of the cable terminal and the other side will slide out and go over the terminals on the battery

That's an oldie. Used to have the same one

 

[WJCO]

Battery terminal cleaner. That part sticking out goes on the inside of the cable terminal and the other side will slide out and go over the terminals on the battery

That's an oldie. Used to have the same one

Damn, you're right. I just looked it up. Never seen one like that.

 

[Tixslam]

You sure that's not an exhaust pipe cleaner?
Just wondering.

 

[WJCO]

You sure that's not an exhaust pipe cleaner?
Just wondering.

View attachment 392164

Blue-Point Tools Battery Terminal Cleaner Brush Tool - BTC-6 - Made in USA • $29.99

BLUE-POINT TOOLS BATTERY Terminal Cleaner Brush Tool - BTC-6 - Made in USA - $29.99. FOR SALE! Blue-Point Tools Battery Terminal Cleaner Brush Tool BTC-6 Made in USA 143947924471

picclick.com

 

[Ddays]

Blue-Point Tools Battery Terminal Cleaner Brush Tool - BTC-6 - Made in USA • $29.99

BLUE-POINT TOOLS BATTERY Terminal Cleaner Brush Tool - BTC-6 - Made in USA - $29.99. FOR SALE! Blue-Point Tools Battery Terminal Cleaner Brush Tool BTC-6 Made in USA 143947924471

picclick.com

There's a really thin gauge wire wound around the springs that scrubs off a small amount of the lead on the terminals when you spin it back & forth.

 

[Spazbyt]

Thanks guys. It seems so obvious now.
I found it going through my father's old tools. I'll probably have a few more mystery tools by the time I'm done.

 

[GP NOIR]

I thought it was for pulling out ear wax

 

[TrailHunter]

This was givin to me because I guessed what it was.... I will tell you it's not necessarily a tool... but more of a universal part. Good Luck.

 

[jeeeep]

This was givin to me because I guessed what it was.... I will tell you it's not necessarily a tool... but more of a universal part. Good Luck.

View attachment 396335View attachment 396336View attachment 396337

bench vice attachment?

 

[TrailHunter]

bench vice attachment?

No.

 

[Speedy_RCW]

This was givin to me because I guessed what it was.... I will tell you it's not necessarily a tool... but more of a universal part. Good Luck.

View attachment 396335View attachment 396336View attachment 396337

Looks like a beam clamp to use for rigging or an anchor point.

 

[TrailHunter]

Looks like a beam clamp to use for rigging or an anchor point.

The use is not far off from that, technically... but No.