My WJ Build

Been a while. To be honest I've been dealing with some health issues with the big D for a few years and finally a lot better. Somewhat depressing at times. It could be worse tho. I've really appreciated Ddays for l helping me with parts and such over the years and WJCO also. Well I got my Gladiator Rubicon Fox shocks on and mucho happy. Way better than the Zone. Still fighting the wobble and ordered some upper Core arms. Took the front shaft off and going to replace with a JY double C. Replaced my rear pads. I had some noise in the rear and sounded like scraping while in motion. Rotors looked like it caught a rock between the pad. Sound still there and wondering if it could be the calipers now. Gotta some other shit I need to post up. I was just googling jeep stuff...in the dark and thought of my slow ass build thread.
 

Attachments

  • IMG_20211113_124930396.jpg
    IMG_20211113_124930396.jpg
    162.8 KB · Views: 8
  • IMG_20211113_124916568.jpg
    IMG_20211113_124916568.jpg
    168.2 KB · Views: 8
I'm sure everyone has had this issue. Lifted your rig...then go why didn't I go taller. It gets more expensive as you go higher. Maybe that's the reason. I met a guy that had a 6.5 long arm with 33's. Damn it looked perfect.
 
This has been sitting in my carport/garage for a while. One of those 6 gang light controllers. Too cold to install right now.
 

Attachments

  • 514oMjnAf9L._AC_SY580_.jpg
    514oMjnAf9L._AC_SY580_.jpg
    48.6 KB · Views: 2
The better half also got me this for Christmas. Not installed, needs coated. Hidden winch mount so you keep your stock bumper. Same company that makes the Kratos tire carrier I have installed. HK Off-road. They are also sIMG_20220114_121337894~2.jpgtarting to make stuff for the wranglers as well.IMG_20220114_121319117.jpg
 

Attachments

  • IMG_20220114_121149495.jpg
    IMG_20220114_121149495.jpg
    199 KB · Views: 2
  • IMG_20220114_121135470_HDR.jpg
    IMG_20220114_121135470_HDR.jpg
    216.3 KB · Views: 2
  • IMG_20220114_121124889.jpg
    IMG_20220114_121124889.jpg
    249.3 KB · Views: 2
  • IMG_20220114_121120375_HDR.jpg
    IMG_20220114_121120375_HDR.jpg
    215.6 KB · Views: 2
  • IMG_20220114_121102055_HDR.jpg
    IMG_20220114_121102055_HDR.jpg
    261 KB · Views: 2
  • IMG_20220114_121051070_HDR.jpg
    IMG_20220114_121051070_HDR.jpg
    237.1 KB · Views: 2
  • IMG_20220114_121149495.jpg
    IMG_20220114_121149495.jpg
    199 KB · Views: 2
Yeah! I love your rig as well. Is it a full 8" coils or did you add pucks too?
Thanksi need to post it up on here at some point

Full 8” springs from IRO Replaced the Rock Krawler springs which were way to spongy these ride nice and flex pretty good.

That winch mount is stout. Love it on mine.
 
Top Bottom