Sheaffadelic
Caught the Bug
i may or may not have missed that....... i should invest in glasses... :asshat:
Morpheus Build: The taking of a red pill
- Thread starter raginkgin1
- Start date
i may or may not have missed that....... i should invest in glasses... :asshat:
raginkgin1
New member
raginkgin1
New member
raginkgin1
New member
raginkgin1
New member
Wait what do you mean by "so far"? Is there more I can do? [emoji106] I'm up for more as long as my wallet has cash in it
Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
RockHard Winch Plate with Barracade 12000lb winch installed
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
I added Quadratec[emoji768] Automatic Billet Aluminum Mirror Mover Pair with Power Heated Mirrors yesterday. The install took about an hour. Here is the driver side.
and here is a close up.
a couple of observations if you decide to put these on your Jeep. 1. The spring load will close the door for you so make sure you have your keys. 2. The curve of the passenger side mirror has a curve to it which distorts the view a bit. Here is a picture that shows the gap between the mirror bracket and the guide plate when the door is closed.
Sent from my iPhone using WAYALIFE mobile app
and here is a close up. a couple of observations if you decide to put these on your Jeep. 1. The spring load will close the door for you so make sure you have your keys. 2. The curve of the passenger side mirror has a curve to it which distorts the view a bit. Here is a picture that shows the gap between the mirror bracket and the guide plate when the door is closed.Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
Here is a picture of the passenger mirror. Not sure you can see the distortion in the pic.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
Second modification done this week was an installation of Yukon 4.56 Ring & Pinion for front and rear Dana 44 axles. While the Jeep was on the lift I also had the Dynatrac Progrip Brakes installed.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
Just received two of these from Brown Santa today. They are going on in 200 miles when I change the gear oil. 
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
MSJKU11
Caught the Bug
raginkgin1
New member
Differential Cover, Spicer[emoji768] Dana 44 Nodular Iron Differential Cover
(Mfr. #: 10023536) if your interested in them.
Sent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
Front diff cover installed
along with a matching rear diff cover
Sent from my iPhone using WAYALIFE mobile app
along with a matching rear diff coverSent from my iPhone using WAYALIFE mobile app
raginkgin1
New member
raginkgin1
New member
Finally getting to this update on my build. I had the Pioneer AVIC8200NEX installed.
I had the installer connect both a rear and front facing camera. The rear is installed on the factory tire carrier. 
Here is the view on the display. 
The front camera is installed just under the winch plate. 
Here is the view from the display.
The last part was to install a USB port on the dash so I can connect my phone while it’s in its dock.
.
I also had the Maestro kit installed so I could retain the factory UConnect controls on the steering wheel.
Sent from my iPhone using WAYALIFE mobile app
I had the installer connect both a rear and front facing camera. The rear is installed on the factory tire carrier. Here is the view on the display. The front camera is installed just under the winch plate. Here is the view from the display. The last part was to install a USB port on the dash so I can connect my phone while it’s in its dock..I also had the Maestro kit installed so I could retain the factory UConnect controls on the steering wheel.
Sent from my iPhone using WAYALIFE mobile app