rigotovar32
New member
So does anyone know the max psi to run for street use?
17x8.5 grenade crawl beadlock
17x8.5 grenade crawl beadlock
max psi on grenade crawl beadlock
- Thread starter rigotovar32
- Start date
Mike Pierson
Hooked
Just run what your door tag says. If you have larger tires, 37s or above, most folks run them around 28 to 30, way lower than the tag. If you need to go higher for some reason, don’t go above your tire rating.
Upvote
0
kevman65
Hooked
You will find the most comfortable range around 30 psi for street use. If you're going to load it down to haul something, then air up but I wouldn't go the tire max, the term "log wagon" comes to mind.
Unfortunately, the sticker on the door is for a much smaller tire than most people run on aftermarket wheels.
Unfortunately, the sticker on the door is for a much smaller tire than most people run on aftermarket wheels.
Upvote
0
rigotovar32
New member
So its safe to do 35 psi? Which I was I ran on my stock tires I thought maybe beadlocks you couldn't run anything higher than like 25 psi thanks for clearing that up
Upvote
0
You can run higher than that but I wouldn't if only because your ride will suck and your tires will wear unevenly.
Upvote
0
kevman65
Hooked
This has nothing to do with beadlocks, but when I had my 35's mounted and balanced on the DT-1's they inflated the tires to 45 psi and HOLY SHIT I couldn't keep the JT straight for nothing.
So I did the chalk test and found that right around 32 PSI was the most comfortable ride. So I set my COLD air temp at 29 PSI and that ended up giving me 32 PSI when the tires warmed up.
Upvote
0
rigotovar32
New member
Alright, thanks, guys that helps me tremendously ill be mounting them up tonight 
Upvote
0