LoD Offroad JLU Build

A couple of updates:

We have fully wrapped up the front bumper lines and the rear (bumper only), and are about to begin development of the tire carrier system. Included are some photos of what we have so far!

pwtrMz.md.jpg
pwtb5G.md.jpg
pwtxZA.md.jpg
 
Also, we are well into development of the rear tire carrier and bumper.

The new generation of Destroyer bumpers will allow users to change out their lights and bezels from the exterior, without having to remove the bumper from the vehicle.

Our first development is a tire riser that allows a 35" tire to be used with the stock carrier and our bumper: for those who do not want the weight, bulk, or cost of a swingarm carrier.

pwDoTD.md.jpg
pwDvj5.md.jpg
pwwf1n.md.jpg
pww0Ls.md.jpg
pwwLvN.md.jpg
 
For those who do not wish to run an aftermarket carrier, we have developed a riser solution to carry an over-sized spare with an aftermarket or stock bumper (to take full advantage of the new, stronger tailgate ) as well as a pair of risers for the stock isolators so that the tire sits nice and snug.

pPDezO.md.jpg
 
Our famous Destroyer Tire Carrier system will be available in the near future for the JLU! Same great tire carrier, with a few improvements: parking assist sensor holes (if you have the system), a swing stop, and camera cable/provisions!

pP8MJ1.md.jpg
pPKihD.md.jpg
 
They're back by popular demand! Soon we will be rolling out our classic frame-mounted Signature Series rock sliders, but this time for the JLU Wrangler!* Frame mounted and 100% bolt on, these have developed a reputation for being pretty robust, as time has shown on JK Wranglers!

*currently available for 4-door only*

py1DqP.md.jpg
py14m5.md.jpg
 
Top Bottom