JK 2 dr Pro comp Lift

[Canvas JK]

I have to Pro Comp 2.5 inch lift and running 32's until they wear out. I would recommend getting an adjustable front track bar to recenter your axle. Ordering one in the next couple of days. Need to wait until after the IRS get's their share of my budget.

 

[Canvas JK]

Here is the JK on 2.5 Pro Comp with 32" MT Baja MTZ

 

[TheDuff]

Go with a budget boost with a good set of shocks and you'll be good to go.

Yep. Hard to find springs that will not give a 2dr only 2-2.5" lift.

Sent from my Galaxy Nexus using WAYALIFE mobile app

 

[ssh6314]

Couldn't he go with rubi 4dr springs? With the diffrent load ratings if he got the right ones he could get that little lift he's looking for if he found the right ones.

Sent from my EVO-3d using WAYALIFE app.

 

[TheDuff]

Couldn't he go with rubi 4dr springs? With the diffrent load ratings if he got the right ones he could get that little lift he's looking for if he found the right ones.

Sent from my EVO-3d using WAYALIFE app.

Yep, you can get about 1.5" from the right jku springs. Then add some pucks to get an extra inch and level out the front, some bump stops, brake line drop brackets, some shocks for a 2.5" lift for a lil more down travel, front disco's, rear track bar bracket, spring retainers if your worried about loosing a spring, and you'll have a nice platform to work off later if you want to add control arms and such later on. This is exactly the route I would go and will be helping my sister in law go on her 2 door. Going this way will allow u to splurge on some nicer shocks (the key to a good ride).
Sent from my Galaxy Nexus using WAYALIFE mobile app

 

[JocoMofo]

Thanks guys for all your input. But I still not sure which way to go ........