Inner fenders after fender chop

[onlyone]

After looking at just about everything, I just couldn’t find a liner I liked. Just too much bling or metal or whatever. I finally found some liners that are like factory that I didn’t know existed. Super easy install and factory look. I think they’re made by Paramount. At $150 (just the fronts) it seems a bit expensive for what they are but that seems the norm these days.

Looks like I might need a bit more lift in the rear. As it is now I have a 3/4” spacer back there. Some pics

 

[WJCO]

Those liners look just like factory.

 

[onlyone]

Those liners look just like factory.

They do. They are just molded to the fender area exactly. I tried to reuse the factory ones but there was just no way to remold them.

 

[jorgelrod]

That looks awesome...

 

[cozdude]

I agree with WJCO, they look just like factory

 

[onlyone]

Got the rears in today. Will install Friday. They Just released them.

 

[Gvellas]

Got the rears in today. Will install Friday. They Just released them.

I'm definitely glad I joined this forum yesterday. I saw your post and found them online for 15% off, so I ordered the front and rear sets for $280 to my door. I just chopped my front fenders and was about to start getting the stock liners back in somehow, but no need now.

 

[benatc1]

Those looks good, I’m considering a fender chop right now, and while I don’t think I’ll “need” inner fenders I do like the cleaner look of them. I’m sure I missed it somewhere but what lights did you go with up front?

 

[Gvellas]

Those looks good, I’m considering a fender chop right now, and while I don’t think I’ll “need” inner fenders I do like the cleaner look of them. I’m sure I missed it somewhere but what lights did you go with up front?

I'm not the OP, but I did a chop using the motobilt brackets which have a 3/4" hole for a light. So I purchased some 3/4" round 3-wire LEDs. I'm hooking the clearance lights to the "low" wire and the turns on the "high" wire. I'm deleting my DRLs until I swap out headlights, then I'll put those on a halo.

 

[onlyone]

Those looks good, I’m considering a fender chop right now, and while I don’t think I’ll “need” inner fenders I do like the cleaner look of them. I’m sure I missed it somewhere but what lights did you go with up front?

I bought the Quake led lights during Black Friday. Not sure I would spend the coin they want for them now. They are very good quality and a crazy easy install.

 

[onlyone]

I'm definitely glad I joined this forum yesterday. I saw your post and found them online for 15% off, so I ordered the front and rear sets for $280 to my door. I just chopped my front fenders and was about to start getting the stock liners back in somehow, but no need now.

There are a few little modifications you’ll probably have to make. It will be self explanatory when you go to fit them. I used some factory clips and bolts that I removed from the factory fenders, instead of their christmas tree push pins they give you. It’s also easier the install the rear with the flares off. Although I installed the rears with the wheels on, it will be much easier to remove those as well.

 

[Mike Pierson]

Thanks! I was just looking at these too. Seems they’re hard to come by right now though. Looks like 3 to 4 weeks.

 

[benatc1]

I bought the Quake led lights during Black Friday. Not sure I would spend the coin they want for them now. They are very good quality and a crazy easy install.

Yes they are pretty pricy, but was looking at them too. Haven’t been able to find the rugged ridge ones available anywhere either

 

[Gvellas]

Thanks! I was just looking at these too. Seems they’re hard to come by right now though. Looks like 3 to 4 weeks.

I ordered mine and had them at my door in 2 days in Northern NV. Viscious off road has them. And they are 15% off. I got all 4 delivered for $280. Recieved yesterday

 

[Gvellas]

There are a few little modifications you’ll probably have to make. It will be self explanatory when you go to fit them. I used some factory clips and bolts that I removed from the factory fenders, instead of their christmas tree push pins they give you. It’s also easier the install the rear with the flares off. Although I installed the rears with the wheels on, it will be much easier to remove those as well.

Yup. I wound up using some of the factory hardware like yourself.

 

[Mike Pierson]

I ordered mine and had them at my door in 2 days in Northern NV. Viscious off road has them. And they are 15% off. I got all 4 delivered for $280. Recieved yesterday

Awesome thank you!

 

[onlyone]

I ordered mine and had them at my door in 2 days in Northern NV. Viscious off road has them. And they are 15% off. I got all 4 delivered for $280. Recieved yesterday

This is who I got the rears from. They have some stock. Crazy fast shipping.

 

[Ddays]

Glad I saw this - I just ordered a set for the JL along with the Quake LED's. Biggest reason I hadn't done this sooner was what to do with the inner liners.

 

[Mike Pierson]

I got my fender liners today and installed the rears. I’m very impressed with the quality of these paramount liners. They are incredibly rigid, significantly more than stock and way more than I expected. The fitment is right on as well. Doing the chop for the fronts on Friday when the Quakes and extra fender clips come in.