Help with noise

MSJKU11 said:
Noise was definitely the shaft. No noise after removal.

Sent from my SM-G965U using Tapatalk
Click to expand...

did the bolts come out easily when you removed it?

I had a similar noise and it turned out to be the bolts on the transfer case end had worked loose.

at lower speeds it would make the noise
 
jeeeep said:
did the bolts come out easily when you removed it?

I had a similar noise and it turned out to be the bolts on the transfer case end had worked loose.

at lower speeds it would make the noise
Click to expand...
No they were all torqued pretty tight. Had to break them loose. Thanks for the idea though.

Sent from my SM-G965U using Tapatalk
 
jdofmemi said:
Looks like 1-3/16" so it would be a 1350.

The caliper found the missing 1/16th the tape measure lost.
Click to expand...

If it’s a 1350, that’s great! It would be worth picking up an extra u joint or two and replace the old one while you have it opened up and have a spare in the Jeep.


2015 JKUR AEV JK350
1985 CJ8 Scrambler
 
wjtstudios said:
If it’s a 1350, that’s great! It would be worth picking up an extra u joint or two and replace the old one while you have it opened up and have a spare in the Jeep.


2015 JKUR AEV JK350
1985 CJ8 Scrambler
Click to expand...
That's a great idea. It looks like 3 joints altogether in there? I'll order a couple for spares.

Sent from my SM-G965U using Tapatalk
 
Took it to the shop today just to check my balljoints and bearing. Both sides need new joints and passenger side needs a new unit bearing. Glad this is getting taken care of before moab! Might as well do brakes now too.

Sent from my SM-G965U using Tapatalk
 
You must log in or register to reply here.
Top Bottom