Looking at this axle to replace a stock D30
http://www.ebay.com/itm/JEEP-J8-Mil...ash=item4d50351512:g:LIsAAOSw5cNYQHGW&vxp=mtr
Seller says it's 5on5 and NOT the "usual" 5x5.5 found on the J8
Seller also says it comes with everything except the "brakes and rotors"
So I assume that:
* Worst case it IS 5.5 and I'd need a set of hubs/bearings like these: http://www.quadratec.com/products/56207_1035.htm
* Rotors and calipers - Assuming normal rubicon d44 hardware will work.
http://www.ebay.com/itm/JEEP-J8-Mil...ash=item4d50351512:g:LIsAAOSw5cNYQHGW&vxp=mtr
Seller says it's 5on5 and NOT the "usual" 5x5.5 found on the J8
Seller also says it comes with everything except the "brakes and rotors"
So I assume that:
* Worst case it IS 5.5 and I'd need a set of hubs/bearings like these: http://www.quadratec.com/products/56207_1035.htm
* Rotors and calipers - Assuming normal rubicon d44 hardware will work.