Fender liner for paint after PSC rear fenders?

[thechrisjones]

I cut the liners for the rear but I think the while that still shows doesn't look clean! Can anyone send pics on what you did or have seen!?!? I'm thinking maybe painting the inner part black. Also any ideas on making the rock armor and fenders blend better? I'm seen where some jeeps have the bottom armor go all the way to the fender.

 

[olram30]

I just left my rear liners out and painted with black paint.

 

[thechrisjones]

I just left my rear liners out and painted with black paint.

What about the white you can see in the picture? That's the outside body! Did you paint it too?

 

[olram30]

What about the white you can see in the picture? That's the outside body! Did you paint it too?

Painted everything under there. Best picture I have on my phone.

 

[thechrisjones]

Painted everything under there. Best picture I have on my phone.

Sharp jeep! Got the EVO enforcer on the way now

 

[olram30]

Sharp jeep! Got the EVO enforcer on the way now

That's a great lift. But yeah, I just painted everything underneath with satin paint.

 

[Shamrocked]

This is what I did. With the fender off and all nutserts done, I taped off just above the bend in the body panel. Sprayed it all with 3 coats of flat back to match the fender. Also sprayed the entire wheel well.

 

[DelvecchioForza]

Used flat black high heat engine enamel paint has kept up amazing also sanded the area just for good measure

 

[Speeddmn]

For my wheel wells, i used flat black primer then the spray in bedliner stuff lightly to protect a bit more from the twang of gravel hitting it.

 

[Armydog]

Flat black rattle-can for me. I just touch it up when it needs it....

 

[Whiskey River]

No photos but I just use the Rustoleum Spraybed Liner. Hell I use it on everything.

 

[thechrisjones]

That's a great lift. But yeah, I just painted everything underneath with satin paint.

Do you have any more pictures?

 

[olram30]

Do you have any more pictures?

nothing to clear of my fenders