Evo Sliders
- Thread starter bruggymonster
- Start date
swampdog
New member
Rb1boxer_3
New member
Get a set of hands to help you. It's tough doing it alone. But here's the angle ones. The skins with these have enough room for it to be easy and put on whenever.
Out in the Boonies
Rb1boxer_3
New member
Another angle
Out in the Boonies
Mtb275
Member
I have the low angle EVO sliders. I like them because of a vertically challenged wife and my kids, they use them as steps. I also put on the aluminum Crawler Conzepts rocker panel skins, mainly because my wife liked the look of them and secondly because the do provide some protection. The first hole was the hardest. After the first one there is no turning back.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Wethy
Member
I have a quick question for the sliders as well. I always wondered if you have room to weld across the top of the bracket that gets welded to the frame. And if any of you have pictures of the bracket against the frame after it being welded that'd be appreciated
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
zimm
Caught the Bug
Wethy
Member
If you turn the mig gun sideways, you can get on top. Best pic I got
That's what I wondered. And I wonder if that means they're okay to not be welded all the way around? That's my only concern about the slider install (not the product to clarify ha ha) but making sure they're properly installed lol
Sent from my iPhone using WAYALIFE mobile app
Rb1boxer_3
New member
I used a stick welder I only got 2 out of the 6 so I need to find someone with a mig gun to finish but for now I silicone to cover the top cause when I put my sliders on they didn't go flush it either had a gap in the bottom or top.
Sent from my iPad using WAYALIFE mobile app
mo0s3
New member
You can get the top, you just have to hit it from both sides to get a complete weld
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app