Evo Pro Series Front Bumper ??

:cheesy: In spite of what all the badasses out there will try to tell you, stingers are for the most part, for LOOKS only. Well, there was this one time were we used it to carry a big bag of trash on it so there's that :crazyeyes:

:cheesy::cheesy:
 
:cheesy: In spite of what all the badasses out there will try to tell you, stingers are for the most part, for LOOKS only. Well, there was this one time were we used it to carry a big bag of trash on it so there's that :crazyeyes:
They make useful seats... and this one time at band camp, i hung off one to get someone up an obstacle. Just remember safety 3rd...

Sent from my SM-G900P using WAYALIFE mobile app
 
I was under the impression by looking through the instructions that you need to have the 2 side bolts of the winch cradle going through the top most portion of the crash bar (which I've completely removed by cutting the welds and grinding them flush) as Evo provides a spacer and a wing nut to thread into:

View attachment 245631

If you cut it all off down to the frame rails then you are correct.
xxxx.jpg
 
Top Bottom